run

  1. Mike Davis

    need to build horse run in

    What do you recommend for the wood and does anybody have some cheap? I mean really cheap? :rotflm:
  2. sawduster2

    Wood Run - 4/4 red oak & white oak

    I am driving from Virginia to Orlando, FL on Oct. 7 and plan to haul 200 - 400 bd. ft. of lumber all or part way to help pay for my gas. I have some excellent kiln dried (6 -8% MC) 4/4 select red oak ($2.50/bd.ft.) & white oak ($2.85) in 4 - 5' lengths that I can deliver to points along the way...
  3. D

    Honduran Mahogany lumber run at Scott's?

    Scott and I have an opportunity to buy a large load of Honduran mahogany, all 5/4, but want to gauge interest before committing time and money. It would sell for $5 or slightly less per board foot, but remember, it's 5/4, so that affects the square foot tally. It's typically in the $8-9 range...
  4. bluthart

    Greensboro Lumber Run

    In case you haven't seen the earlier post from a few weeks ago... I will be in the Greensboro area this Friday, Sept 16th from between 2 and 3:00 pm with some wood for sale. I have some room left so if anyone wants anything it is as follows... 5/4 Red Oak - 5ft lengths @ $2.00 BF. Approx...
  5. bluthart

    5/4 Red Oak and Ash for Sale! Possible wood run!

    I have some real nice 5/4 red oak and ash in 5' lengths. This wood is kiln dried and beautiful, straight, flat with gorgeous grain. I'm asking $2.50 BF and I have approximately 350 BF of oak and 250 BF of ash. I am in Iron Station, NC. Iwould consider bringing this along to Burlington if amyone...
  6. bluthart

    UPDATE - Greensboro Wood Run

    Most of the lumber I had was taken to a High School in Davidson. I still have some nice stuff for sale though. I still have some 4/4 Poplar in 5' lengths, and some gorgeous 5/4 red oak in 5' lengths. This is nice straight, flat, kiln dried wood, in 5' lengths. Widths vary from 5" to 10"...
  7. zapdafish

    Bobby G - Clamp run

    I will be heading over there this weekend to pick up my clamps. If anyone in the Raleigh area hasn't made it yet, I can pick yours up as well. I work around Rex Hospital if you want to arrange to drop off your payment. I live in Holly Springs if you want to arrange for something in the...
  8. Ken Kimbrell

    G3 run out question?

    A posted in another topic I'm just getting started in turning with my HF 12'' x 33-3/8''. So far everything seems to be OK with the lathe, except for a very slight misalignment between the head and tail stock. So, this question deals with the Nova G3-D (Delta) that I picked up at my...
  9. Cato

    How to fix dye run??

    I have a dye run on a panel of a box and trying to figure out if I can fix it. I am using walnut, that I first sealed with a wash coat of shellac, then applied transtint orange with alcohol carrier, wiping it on. Well, I got a drip run on one side of the box that I didn't really notice until...
  10. flyrod444

    Kobra test run #2

    Second test run of the Kobra system! Hi all, here are a few pic's of the how the second test run went with my new toy. I have turned a few forms this large free hand and found that it took all I had to hollow out a project that was this large and deep. The Vase is 13 1/2" tall with the inside...
  11. flyrod444

    Kobra Hollowing system Test Run!

    Kobra test run! I've been hollowing free hand for a number of years now and decided it was time to look for a good hollowing system. I decided after much research into the subject that the Kobra was the best one on the market for my needs. There is a wait after you order one since they are...
  12. ScottM

    2011 Picnic Wood Run Part 1

    One of the featured events at our picnic is a good old fashion wood run. This year is no exception. Scott Smith has agreed to bring quarter and rift sawn oak (red and white), ERC, burled white oak slabs, zebrawood, and cypress. While Scott plans to bring extra stock, he would like people to...
  13. S

    lumber run to Scott Smith's place today

    Since I had the time, great weather and a couple bucks in my pocket, I made the LONG run to Scott Smith's place in New Hill for some beautiful QSWO today. If you haven't been there I highly suggest you plan a trip soon. He has a fantastic facility, large inventory of different QS species, great...
  14. scsmith42

    This Saturday's lumber Run at Scott Smith's

    We're planning to kick things off at 10 am. It looks like the weather should be ok until later in the afternoon. For anybody that needs directions, please send me an e-mail via NCWW. My cell phone is 919-291-0095 in case you need to contact me directly. I'll have some soda's and water...
  15. D

    Lumber Run - member request list for Af. Mahogany

    I'm re-posting this as a separate thread so it doesn't get lost in the original: Here's what we've got for the mahogany (we have plenty of zebrawood so we're not keeping tabs there): Toolman 40 Bholcombe 50 BigDog72 20 SplintEastwood 50 LWHughes149 15 Bas 50 JimmyC 50 wrwilder ? victoon 50...
  16. D

    Lumber run coming soon at Scott Smith's

    Scott aluded to this in his recent post and I want to add some details. We bought a large quantity of zebrawood and a lesser amount of African mahogany (possibly sapele, but to be honest, I haven't seen it yet) off Craigslist. We plan on hauling it to Scott's as early as next week, and will be...
  17. froglips

    Mind if I run a scrolling banner for Tom?

    Tom has asked for some help this weekend. Any objections to running a scrolling banner today and tomorrow till say noon? Jim
  18. BrianInChatham

    Raleigh\Durham\Chapel Hill walnut run

    Thought I would do as MXRacer has and start a seperate thread to coordinate a run for those of us who are interested in some of the bargain walnut in Youngsville. So- what we need to know: 1) who's buying (for certain) and how much 2) how are we going to move this stuff- who wants to...
  19. NCTurner

    Canceled Raleigh Walnut Run to Charlies

    Guys, For you Raleighwood guys wanting in on Walnut, here is the deal. I am going Sat am. I am meeting up with Steve(zapdafish) and heading over to Capital Blvd. We will stop at Perkins on capital at about 9:30 and be in a white cargo van. I have room for about 200-300 additional BF. If you...
  20. M

    Charlotte Walnut Run to Youngsville - It's a bust. :(

    I am disappointed to say that the lumber run didn't work out. First I want to say that everything nice that people have been saying about Charlie is all TRUE. :wsmile: He's a really nice and fair guy and he's very up front about the wood. No issues there. Here are the the issues I faced...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top