glass

  1. mpholway

    Remaining Salvage Give Away

    By way of channeling Phil Soper, I have some things I would like to offer to the NCWW community. I have a storage unit that I need to empty and I have a few things that may be of interest to some of you. If anyone sees anything that they would like, they should reply to me so we can make...
  2. Timmy

    Wine Bottle/Glass Rack

    I've been staying busy in the shop, but forgetting to post some of it. Here is a short video I made of my most recent project. I've also been getting into blacksmithing a bit and made a couple videos on YouTube so swing over there and check out the videos and if you want, subsribe...
  3. Corner Cupboard

    Corner Cupboard

    A little aggressive for a first project, but ti turned out great. Wish I had built it in two pieces though! It's actually pine with many coats of cherry gel and urethane
  4. J

    Wine glass rack pattern

    Looking For a pattern or dimensions for hanging stemed wine glasses overhead upside down Thanks in advance Dwight :help:
  5. C

    Fixing Stained Glass

    I did not know exactly where to post this or even if I should, but since this site seems to have a lot of knowledgeable people with a wide variety of background I will ask. We have some stained glass windows in our Church and some of the small pieces of glass have been cracked. We do have...
  6. W

    Glass for Picture Frames near Charlotte

    I had three pictures enlarged for the LOML for Christmas and made frames for them. I would like get some non-reflective glass for them (16" X 24"). I went to an art supply/frame shop to get some and they wanted an arm and a leg for the glass.:nah: Can anyone suggest a good source for...
  7. Wine

    Wine

    Ready to have that glass of wine? Here are a couple wine glasses i made sometime ago from Spalted Maple. I think i'm correct on the wood, if not please correct me.
  8. leftoflefty

    Sanding Glass

    So I just went to the store to buy a pane of glass for a picture frame. It turns out to be slightly, and I mean slightly, too big to fit into the frame. :BangHead::BangHead::BangHead: My question is, can I just take some sand paper and shave it down to fit?? Or would this be a bad idea...
  9. W

    Float Glass

    Hi all you Durhamites, I'm looking for a float glass supplier in the Durham area. Does anyone have any suggestions on who might have some good sharpening glass around here? Thanks Greg
  10. F

    Picture frame glass

    A piece a little larger than 2' x 3' around Hickory?? I know Michaels and AC Moore are the obvious choices but they are always expensive...
  11. scsmith42

    Glass source sought - non standard

    For the past few years the surgical lights on my wife's veterinary hospitals have been going through a lot of 85W quartz halogen bulbs and bulb holders. We've been spending close to 1K per year in replacements (ouch!); quite frankly the unit is not designed for the heat nor being left on 6 hours...
  12. Larry Rose

    Glass Question

    I've been asked by a friend to build a table with a glass top for his wife to display her beach glass collection. The top will have a 2 1/2 inch frame around it with the glass let into it. It will be sort of like a horizontal shadow box. My questions are what thickness of glass to use and how to...
  13. T

    How does one make lites / mullion for glass cabinet doors?

    I am making a full pane glass door for a kitchen cabinet. I would like to give it a french style look with 6 lites and i need to know how to make the mullion. can anyone refer me to a site or give some insight into how this is done????
  14. R

    Attaching Wood to Glass

    My neighbor has asked for help constructing a display case for his son who collects major league baseballs. His idea is a home plate-shaped case, pointy end down, with shelves for the balls. The thought is to enclose the front with a piece of glass that slides down from the top in a groove cut...
  15. froglips

    Handplane + Sandpaper on glass notes

    I'm a trial and error kind of learner. Sure, I could "READ" or "ASK", but I prefer to touch the stove to see if its hot...... then touch it to see if its still hot...... wash, rise, repeat...... As part of the Hillsborough Orange Woodworkers Meetup, we have been tuning up metal bodied hand...
  16. W

    sheet of glass

    I need a 42inch by 42inch sheet of plain or frosted glass (1/4 to 3/8 inch thick) for a project that I am working on. Can someone recommend where I can buy this at a reasonable price? Thanks!
  17. PChristy

    Wine glass video

    As I started to watch this http://marleyturned.com/id110.htm I noticed that he turned his lathe all the way up to full speed - Do any of you guys do this also? I have been rough turning everything on the slowest speed - Does it make any difference?
  18. R

    Glass for a Trophy Case

    My son-in-law volunteered me to build a couple of trophy cases for my grandson's school. We're in the planning stages. These things will be big (7' tall x 6' wide) with a lot of glass. The doors will be sliding glass panels. All the track I've found is for 1/4" thick glass. Any one know what...
  19. Mark Placek

    Wood & Glass bowl

    Here's the first in a series of bowls to use a glass feature strip. This bowl measures 19" x 22" and 4.5" deep, it's made from African Padauk and is finished with tung oil and wax. The white stripe is the sapwood I book matched to help break up all the red colored wood. The glass is 1/4"...
  20. jonnyfontaine

    sheet glass cheap

    just letting you guys know there is sheet glass available at harolds at crabtree valley mall... they are goin' out of business and selling everything and one of the things they are selling is the glass shelves... they are 18" by 38" and 1/2" thick... i got 3 of these for $20... so you can bargin...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top