cnc

  1. Artisan Pirate

    CNC V-Carved Sign For Some Good Friends

    Hey Everyone! In this fun CNC Video, I make a V Carved sign for my good friends at First Due Woodworks! Devin and his family are long time supporters of the channel and I finally got to meet them this past September on the Myrtle Beach Vacation and when I got back to the shop, I knew I had to...
  2. Artisan Pirate

    V-Carved Sign For The 4th Of July, Video (Don't Tread On Me)

    I hope this is ok to post and is not controversial by the nature of the flag Hey Everyone! In this fun project, we make an awesome Dont Tread On Me Flag using the V-Carving method on the CNC Machine! This flag was made for a good friend of mine to go with his military collection and I hope...
  3. A

    ShopBot Basic training class

    Hey everyone, I will be hosting a shopbot training session at Cedar Ridge high school on July 10-11 from 8 A.M-5 P.M. (I can move it to 9 if 8 is a problem for everyone who plans to commute) There will be a lunch break at noon. ShopBot will be sending a technician to teach the class. I asked him...
  4. Artisan Pirate

    V Carved Canteen Sign For The Boys & Girls Club

    SABGC (Boys and Girls Club) V Carved Canteen Sign Designed in =AT0WJRgJ36C_uWyZHB6gOzE9IMKVCry3z0HuuTY7oStzKqYVN76n3yjIV8PRtx9J6Xa33v2DE_WWn_xqWCC-TybKW4zQje4Upfzu70IZLOCCgM35rDoLCiHnMyAo9FA1TjRvisFLJj59Q-JQDLDForGx9iLkSbBSICiR6oRqQwAUXSnK7vHaXxoUj0nflPvJfdQcPqExBPMLww']@vectricltd and I used a...
  5. bbrown

    CNC help

    Hey folks, Does NCWW maintain a list of CNC operators who are willing to help members? I am seeking CNC help to make a series of "roughed out" 3D shapes for my carving (max size is under 16-18, and typically about 12"). Anywhere between Albemarle (my location) through my drive to Lynchburg...
  6. D

    Anyone looking for a CNC business?

    Looking for the right person to take over mine. Hoping someone in this community who has the passion and interest.
  7. ComblocCustoms

    Rifle Stocks - need local manufacturer to make Kalashnikov pattern stock sets

    I would like to find a local (Charlotte area) manufacturer with a CNC machine to make Kalashnikov pattern stock sets for my company. If this is a project that you would be interested in I would like to obtain a quote for this service. I can provide photos of the models that I wish to have...
  8. A

    X Carve Questions

    Hello all, I’ve been hunting for a CNC Machine for months now and recently came across an ad for the X Carve by Inventables. I’ve spent the last week watching videos on YouTube gathering information on the pros and cons of the machine and seeing projects that people have created using it. I’m...
  9. E

    The Maker's Space - Raleigh

    Hello, my name is Matt. I have a small furniture business called Enkle Designs but my father and I (both experienced woodworkers) have recently opened a shared woodworking shop/woodworking co-op. :eusa_danc We are offering membership and residency at The Maker's Space for woodworkers, metal...
  10. CNC machine

    CNC machine

    This is the finished product of my CNC build, it is a Kronos Robotics design using easily obtained materials and basic tools and skills to assemble. The project took me about two months to complete working a little bit at a time.
  11. CNC machine

    CNC machine

    This is the finished product of my CNC build, it is a Kronos Robotics design using easily obtained materials and basic tools and skills to assemble. The project took me about two months to complete working a little bit at a time.
  12. CNC machine

    CNC machine

    This is the finished product of my CNC build, it is a Kronos Robotics design using easily obtained materials and basic tools and skills to assemble. The project took me about two months to complete working a little bit at a time.
  13. A

    Project: JetSki Shop Stand

    Hello NCWW community, I wanted to seek your advice in regards to material choice for a project I am working on. I have designed these interlocking stands that can be routed out so they can be assembled without tools. My question is in regards to strength and choosing the correct material...
  14. Obxwoody

    Question for camaster cnc owners out there

    Hello, We are interested in buying a camaster cnc machine...and I was wondering if any of the members out there who had them could provide feedback... namely we are interested in what model you have, how long you've had it, how often you use it (daily, weekly #of hours approx.)? Are there...
  15. CNC Engraved Biz Cards - Test 2

    CNC Engraved Biz Cards - Test 2

  16. CNC Engraved Biz Cards - Test

    CNC Engraved Biz Cards - Test

    CNC Engraved business cards. This is an attempt to use a rotary tool to engrave wood for our cards.
  17. CNC Engraved Biz Cards - Test

    CNC Engraved Biz Cards - Test

    CNC Engraved business cards. This is an attempt to use a rotary tool to engrave wood for our cards.
  18. CNC Cut Monogram

    CNC Cut Monogram

    Monogram cut using our CNC Router
  19. CNC Cut Monogram

    CNC Cut Monogram

    Monogram cut using our CNC router
  20. X

    homemade DYI CNC router

    1. Looking for a homemade DYI CNC router 2. Prefer the Greensboro area or nearby 3. I have a little wood project that I would like to try on a medium format (24"x24") CNC router 4. If you would like to sell your homemade CNC or maybe do a little CNC work for some money, please contact me 5. The...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top