broken

  1. decibel

    Broken Delta Drum sander

    I have an 18-36 delta drum sander that "caught" my jointer while moving it around so I now have a dilemma. The table on these elevate with 4 screws. The screws bent. So I thought easy enough to replace the screws but it also seems the assembly they go into have a lot of free play now and is...
  2. 100_2106

    100_2106

    • Mark Gottesman
    • Media item
    • broken pulley step
    • Comments: 0
    • Album: Mark Gottesman
  3. johnpipe108

    Photo upload seems to be broken!

    Evidently there has been a software upgrade,and not a good one! The upload page interface has been changed, and is more awkward to use. Site response seems to have slowed down! The "photo processing page" following the upload doesn't even show up! After entering upload, the site software takes...
  4. Mark Stewart

    Broken bowl re turned.

    As I read learning to turn the hard way I remembered this blank I broke , so I rechuched it and put the CI1 to work this is the end result. But while I have you here my question for you turners is when you have a piece like this how do you sand the end grain smooth when you have missed matched...
  5. B

    Broken screws ....

    I've put about 40 hours building a toddler bed the last three weeks. I was finally at the point where I was ready for the dry fit and started putting on the hardware. When I was putting on the bed rail kit, I had two brass screws break on me. :BangHead: They broke well beneath the wood line...
  6. SteveHall

    Customize profile broken?

    I can set custom colors in my "Customize Profile" user settings, but they don't seem to work. Are these broken or disabled?
  7. russellellis

    Repairing broken door???

    How would you repair this? Its looks worse than it is, and could be covered up again with what the previous owners used, doorknob reinforcer, but id like to repair before it gets worse. Since this side is completely broken, its causing some flex in the door here. Ive thought about routering...
  8. Matt Schnurbusch

    Broken Links

    I was surfing through the link library. More specifically, the jigs and fuxtures portion of the link library, and found a couple of broken links. I don't mean to be a jerk, but if you are the original poster, or even if you know where the broken links should point now some fixes are needed, or...
  9. K

    New Delta planer broken??

    I went to lowes today and finally bought a delta planer with the 15% off. Of course, I bring it home make some room and go to try it out......the rollers aren't moving. It is correct that they are supposed to move when I turn it on, correct?? I guess I get to return it tomorrow, SUPER. Wes
  10. Bigdog72

    Broken blade guard

    Set up my 10 year old Delta 36-220 miter saw to cut 2x's today and the screw that attaches the blade guard to the control arm broke out of the plastic. This saw survived two moves and no use for 3 years but nothing lasts forever! Went online to see how much a new blade guard is and they are no...
  11. J

    Delta 55-280 planer broken

    Planing some more Black Locust last night - heard a loud noise come from the planer and the stock stopped feeding through. Motor and cutter still turning. Spent some time and took it apart to find a broken gear laying in the bottom of the gear box cover along with a shredded plastic gear box...
  12. Eaglesc

    Broken Bit/ Broken wave

    A while back I posted a blank called OOPS! This was made from walnut and maple with walnut and maple veneers http://www.ncwoodworker.net/forums/showthread.php?t=9297 Though the blank did not "go" where I wanted it to a very good friend, Broken Bit, liked it and asked if he could turn it. I...
  13. Tarhead

    Number of Members Online Record Broken

    96 members were online last night! I can remember when we didn't have 96 members total:-)
  14. Tarhead

    HF Moisture Meter Question: Is it broken or am I doing something wrong?

    I'm on my second one of these and this one is doing the same thing. I do not get a reading on green or dry wood, high or low scale. If I touch both tines to my skin it reads but nada in wood. Nothing about this in the instruction sheet. I've tried really pushing it in to the wood but I'm afraid...
  15. Sharp Blade

    Broken knife blade

    Hi guys, does anyone know of a place I can get another blade for my Green River Works Buffalo skinner? For some dern reason the blade chipped out big time. See sad photo below.
  16. sapwood

    Another record broken

    Steve, looks like you brought us back with a wallop :lol: 130 user online this morning :eusa_danc Why Not? Sapwood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top