area

  1. red

    Huntersville Area

    Hey All, I just joined the site. I have been woodworking for 29+ years off and on with 10 of those years as a self employed custom furniture maker in CT. I moved to NC five years ago. I just started getting a small shop together to work on some smaller projects for myself. Red
    • red
    • Thread
    • area huntersville
    • Replies: 24
    • Forum: Who We Are
  2. J

    PE request from DOC shop crawl to Clayton/ Raleigh area

    Hey All, I'm buying one of Brian's (Bluthart) Dado sets and can't make the DOC shop crawl. I was wondering if some body from my neck of the woods was going to be at the event and could pick it up for me. I will then make arrangements for a local pick up as I live in Clayton. Thank you in...
  3. merrill77

    Anyone in Raleigh area have a new(ish) 12v Makita battery?

    My drill, a 12v Makita, is feeling quite lack-luster lately. I like it, and it seems to be in good shape, except for a lack of power. The motor sounds great, the armature is clean and the brushes look good, so I'm thinking it is the batteries. I have 3 batteries and they all give the same poor...
  4. PChristy

    Antique Tools - (Charlotte/University Area)

    not mine http://charlotte.craigslist.org/tls/1435097605.html 1. Rubber-head hammer - $15.00 2. Planers (2) - $20.00 3. Ice pick - $5.00 If interested, call 704-597-7538 Location: Charlotte/University Area it's NOT ok to contact this poster with services or other commercial...
  5. S

    New member from Asheville Area

    Learned about the organization at Klingspor expo today. I am also member of The Carolina Mountain Woodturners and a relative beginner to all things of woodworking.Trying to learn something that can keep me busy in retirement in a year or so.
    • Sigpa
    • Thread
    • area asheville member
    • Replies: 17
    • Forum: Who We Are
  6. K

    New Member from the Hickory area

    Hi Everyone - I came across the website today and ended up meeting some of you at The Molding Source in Mooresville. Those I met, including Rick the owner of the shop made me feel so at home (easy to do in the middle of that much wood to drull over) that I felt I would fit right in with all of...
  7. M

    Fee for use woodshop in the Charlotte area?

    I enjoy woodworking but currently lack the space for a woodshop. Where I previously lived there was a craft center where people could use the woodshop for a quarterly membership fee. Is there anything like that in the North Charlotte/Harrisburg/Concord, NC area? Or is there a network of...
  8. H

    Raleigh Area Ductwork

    Looking for a dust collector metal ductwork (6 inch and 4 inch) and fittings supplier in the Raleigh area. Any suggestions?
  9. Berta

    Pony express from Fayettevill, Cameron area to WV

    I need to make a trade with Steviegwood in Arther, WV. This would be best if we could move the stuff around without postage. (Router for Sander). I am willing to drive a little to meet you and get this going.
  10. timf67

    Hiring in Charlotte Area (Clover, SC)

    I wanted to post this, but if it is not allowed please remove it. My company placed an add in the Charlotte paper for the following: Chemical Packager/Operator Progressive specialty chemical manufacturer seeks a happy, highly motivated, team oriented, and disciplined individual with prior...
  11. scsmith42

    Where to find coax and connectors in Raleigh area?

    I'm building a home-made directional antenna to extend my home LAN to my new woodshop. I already have an external omni antenna at the house, and am in the process of building the antenna for the shop end. I need an RP-TNC connector, and about 30' of a low loss coax such as LMR 400 or B 9913...
  12. Scott Kuykendall

    Hardwood Source in Spartanburg SC Area

    I have been using up my stash of Red Oak and I need to find a source for some more in the Spartanburg Area. I am disabled so I don't use much at a time, I need enough to glue up a lid for a Large toy box I am in the middle of making for the grand daughter and there is no way I will pay what the...
  13. NCTurner

    PE Request Raleigh area to Whittier Area

    Folks looking for some help for a fellow NCWW, Ken(Boxxmaker) purchased 5 gal of Anchorseal and paid extra to have it shipped, but shipping is coming back way higher than I expected!:BangHead: Is there anyway that we can get this bucket to him. I have the bucket and can get it to anyone in the...
  14. rcflyer23

    Any luthiers/Guitar Builders in the Charlotte Area

    I was wondering if we have any members out there who are Luthiers/Guitar Builders out there. I am trying to learn as much as I can online but wanted to see if there was anyone local who would be willing to show me some of the basics and learn a little.
  15. scsmith42

    Is anybody in the Charlotte area looking for a commission?

    A friend of mine in Albemarle is looking for someone to build him a built-in desk / filing cabinet system for his house. Nothing overly fancy, just good solid craftsmanship and materials. His budget is probably around 2K - 2,500. If anybody is interested, please send me a PM and I'll put...
  16. J

    Anybody have a good source for Cyrpess around the Raleigh area?

    Hey guys- I was wondering if anyone had a good source around or close to Raleigh for Cypress? I am wanting to build some outdoor furniture and would like to build it out of Cypress. I am hoping to find some to pick up by Friday or Saturday. The family is going out of town for a couple of days...
  17. D

    Looking for a Charlotte area shop that does doors and drawer fronts

    I was going to make my doors and drawer fronts but due to time constraints I decided to buy them. Is there a shop in the Charlotte area that specializes in drawer and door fronts? I am looking for shaker style, very simple. I want to paint them, so unfinished but sanded. 3 inch rail and...
  18. R

    Express needed Cary to Char. Area.

    If there is anyone headed up towards Cary from Char. or from Cary to Char.? I'm gettig the HF lathe from NCturner:eusa_clap.I could use some help getting it down this way.It is a new lathe still in the box so you want have to fuss with any sawdust. If that helps.If anyone can help shoot me a PM...
  19. Ken Massingale

    70's Vintage Rockwell Unisaw $500, G'ville SC Area

    Not mine.. http://greenville.craigslist.org/tls/1307955596.html Good old saw,70's vintage.3 HP motor with new bearings,new arbor bearings.Call Dave 864 276 7734 Location: Lowndesville,SC it's NOT ok to contact this poster with services or other commercial interests PostingID...
  20. algustaf

    Looking for someone that has a spraybooth in Durham area

    I am new to the NCWW forum but thought you would be a good group to ask. Let me preface this with "I hope this is an allowable question." A co-worker of mine, just brought back a headboard that her father built for her. It is primed, but not 'finished'. Since I don't have any spray...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top