step

  1. A

    Step by step cabinetry help

    What resource would you all recommend for me to use to get step by step instructions, including tools needed, on how to build cabinets, but more specifically doors (raised panel etc.) and drawers.
  2. Finished Step Stool

    Finished Step Stool

    Combination Carrier/Step Stool (Modified for stability)
    • KC7CN
    • Media item
    • step stool
    • Comments: 0
    • Album: Fun Stuff
  3. Joe Scharle

    Bandsaw table insert, step by step

    Had a cutoff jam in the insert yesterday and it caused a permanent pucker at the mouth that won't go flush with the table. RIDGID says my new one will be here in 10-14 days, so this AM I made one from 1/4" hardboard and thought I'd go back, take some pics and share this. First, as with any...
  4. Joe Scharle

    Simple Bandsaw Box Step by Step

    In another post I was asked to show the steps to make these simple boxes. Here we go..... I've used a piece of 4 X 4 glued up scrap. You can see there are at least a couple of profiles that will work. I'll use another profile too. I draw the outlines for the cuts with a compass and...
  5. Flute Maker

    Step Pulleys

    I have an old Craftsman lathe with step pulleys and want to slow it down some more at times...Does anyone know of the best place to get larger step pulleys or have any good ideas? I would like to have a nice lathe but I have adapted this to do what I need at the time. Thanks !!!
  6. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  7. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  8. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  9. eyekode

    QSRO Step Stool

    I am the tallest person in my family at 5' 11" so stools are a necessity :). I started out with an arts and crafts-ish design in SketchUp: But when I went and looked at my stack of lumber I threw out the plans and made something a little different: It is made out of a single board from...
  10. Mr. Lahey

    Project: Sailboat Dock Step

    This is probably my first real project, and a gift for someone. It's a step that will be tied to a dock, it is to help board a sailboat. I started this project by learning to use Google Sketchup. It took about 4 days to get the hang of sketchup, but was well worth it. After designing it I...
  11. Mark Gottesman

    Anyone ever fix a step pulley with JB Weld

    I am repairing a drill press that my father made while studying to be an Industrial Arts Teacher. So, I am trying to keep it "original", so to speak. Have a 4 step motor pulley that has a chip out of it. Has anyone ever tried to build up a missing section with JB weld and have it hold up in...
  12. 100_2106

    100_2106

    • Mark Gottesman
    • Media item
    • broken pulley step
    • Comments: 0
    • Album: Mark Gottesman
  13. PChristy

    Step Drill Set

    http://www.tooliday.com/ Wilmar Performance Tools W9003 3-Piece Titanium Step Drill Set Price:$19.95 Sale Price $8.99 + UPS $5.00 shipping
  14. froglips

    Shop step (aka advanced physics/math).....

    Ok, I'm done pulling out my beard hair. I'm now confused. Here is the situation, my shop is up on blocks, the ground slopes from right to left as you face the door. Due to a lot of hard work on my part, the shop is level. Far right of the door, its 15" floor to ground. Far left, its 16 1/2"...
  15. WoodWrangler

    One Step Closer to Rockin!

    Slow & steady wins the race? Well, maybe not in this case. But I'm getting closer to rocking in my Maloof-style rocker! This weekend I was able to get a good portion of Sunday in the shop and got the rockers glued up! Next is shaping them into the legs and some final sanding EVERYWHERE...
  16. MrAudio815

    Step Stool -Used Sander from Splint Eastwoods

    Hey Everyone, I made a step stool for my wife... She wanted a small step stool to get in and out of bed easier and for a short foot rest. I used Splint Eastwood's Ryobi ROS to sand it up. :icon_thum Worked Great, A Sincere Thank you to him. :notworthy: Well it's not the best, I used my Lock...
  17. Jon

    I am going to step down as Mod now

    It looks like I am not going to have time to be on NCWW much. Between running 2 different business and traveling back and forth I just dont think I will have time. Thank you for letting me be a part of such a great group, I really did enjoy it.
  18. SteveColes

    Another major step

    As I hope you all know, it is my and the rest of the Board of Directors' goal to make NCWWI and North Carolina Woodworker.net independent of myself. That is from all aspects, technical, management, and monetary. We have made great strides in the last 6 months towards this goal. Revenue from...
  19. SteveColes

    Another major step

    As I hope you all know, it is my and the rest of the Board of Directors' goal to make NCWWI and NCWW.net independent of myself. That is from all aspects, technical, management, and monetary. We have made great strides in the last 6 months towards this goal. Revenue from ads and affiliates have...
  20. T

    One step closer to hvac in the shop!

    After posting for help needed. Phil S volunteered to give my brother and I a hand for a few hours. I am very excited and got done what I had hoped to. We got the main unit mounted and the flex air duct run over to a temporary plemum. Once it is hooked up I will only use it while I am in the shop...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top