step

  1. A

    Step by step cabinetry help

    What resource would you all recommend for me to use to get step by step instructions, including tools needed, on how to build cabinets, but more specifically doors (raised panel etc.) and drawers.
  2. Finished Step Stool

    Finished Step Stool

    Combination Carrier/Step Stool (Modified for stability)
    • KC7CN
    • Media item
    • step stool
    • Comments: 0
    • Album: Fun Stuff
  3. Joe Scharle

    Bandsaw table insert, step by step

    Had a cutoff jam in the insert yesterday and it caused a permanent pucker at the mouth that won't go flush with the table. RIDGID says my new one will be here in 10-14 days, so this AM I made one from 1/4" hardboard and thought I'd go back, take some pics and share this. First, as with any...
  4. Joe Scharle

    Simple Bandsaw Box Step by Step

    In another post I was asked to show the steps to make these simple boxes. Here we go..... I've used a piece of 4 X 4 glued up scrap. You can see there are at least a couple of profiles that will work. I'll use another profile too. I draw the outlines for the cuts with a compass and...
  5. Flute Maker

    Step Pulleys

    I have an old Craftsman lathe with step pulleys and want to slow it down some more at times...Does anyone know of the best place to get larger step pulleys or have any good ideas? I would like to have a nice lathe but I have adapted this to do what I need at the time. Thanks !!!
  6. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  7. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  8. Kids Step Stool / Chair

    Kids Step Stool / Chair

    • davejones
    • Media item
    • children kids step stool walnut
    • Comments: 0
    • Album: Crib Project
  9. eyekode

    QSRO Step Stool

    I am the tallest person in my family at 5' 11" so stools are a necessity :). I started out with an arts and crafts-ish design in SketchUp: But when I went and looked at my stack of lumber I threw out the plans and made something a little different: It is made out of a single board from...
  10. arts_and_crafts_stool

    arts_and_crafts_stool

    • eyekode
    • Media item
    • sketchup step stool
    • Comments: 0
    • Category: Furniture Projects
  11. 69CG9029

    69CG9029

    • eyekode
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  12. 69CG9028

    69CG9028

    • eyekode
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  13. 69CG9027

    69CG9027

    • eyekode
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  14. 69CG9026

    69CG9026

    • eyekode
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  15. Step stool

    Step stool

    Side view
    • CatButler
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  16. Step stool

    Step stool

    Front view
    • CatButler
    • Media item
    • step stool
    • Comments: 0
    • Category: Furniture Projects
  17. Mr. Lahey

    Project: Sailboat Dock Step

    This is probably my first real project, and a gift for someone. It's a step that will be tied to a dock, it is to help board a sailboat. I started this project by learning to use Google Sketchup. It took about 4 days to get the hang of sketchup, but was well worth it. After designing it I...
  18. Mark Gottesman

    Anyone ever fix a step pulley with JB Weld

    I am repairing a drill press that my father made while studying to be an Industrial Arts Teacher. So, I am trying to keep it "original", so to speak. Have a 4 step motor pulley that has a chip out of it. Has anyone ever tried to build up a missing section with JB weld and have it hold up in...
  19. 100_2106

    100_2106

    • Mark Gottesman
    • Media item
    • broken pulley step
    • Comments: 0
    • Album: Mark Gottesman
  20. PChristy

    Step Drill Set

    http://www.tooliday.com/ Wilmar Performance Tools W9003 3-Piece Titanium Step Drill Set Price:$19.95 Sale Price $8.99 + UPS $5.00 shipping

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top