sandpaper

  1. Performax 10-20 sandpaper assortment

    Performax 10-20 sandpaper assortment

    • sawduster2
    • Media item
    • 10-20 assortment performax sandpaper
    • Comments: 0
    • Category: Member Galleries
  2. Flute Maker

    2" Klingspor Sandpaper Disks

    Where is the best place to get the 2" sandpaper disks that stick to the Sorby Sandmaster and similar tools (Klingspor would be good or a comparable brand would be good as well..best deal !!)...??I guess that is hook and loop type...I have never really understood that hook and loop term...looks...
  3. cyclopentadiene

    Need help installing sandpaper on Delta 18-36 drum sander

    I have a Delta 18-36 model 31-255 drum sander that I purchased used. It was working fine but needed a new sanding belt applied to the drum. i purchased a 4 pack and have destroyed 3 of the sheets (at $7 each) with no successful sanding job completed. The instructions in the manual make it...
  4. P

    SIA sandpaper

    Does anyone know were I can purchase Swiss Industrial Abrasive (SIA) sandpaper?
    • pmc
    • Thread
    • sandpaper sia
    • Replies: 6
    • Forum: Finishing
  5. merrill77

    GatorGrit and 3M sandpaper vs Klingspoor

    Over on the cheap tool regrets thread, several people mentioned cheap sandpaper and some specifically mentioned how much better Klingspoor sandpaper is. I've certainly learned not to buy HF sandpaper (again) and have found the Gator Grit or 3M brands at Ace/HD/Lowes to be a big step up, even...
    • merrill77
    • Thread
    • gatorgrit klingspoor sandpaper
    • Replies: 16
    • Forum: Finishing
  6. J

    Scotch Brite Pads vs. Sandpaper

    I've started to experiment with the white and gray pads for light work in between finish coats and burnishing before a final coat. 3M claims that white is "light duty" and gray is "ultrafine". Certainly less messy than sandpaper or steel wool, but not as aggressive either. :help: Is there a...
    • Jeff
    • Thread
    • brite pads sandpaper scotch
    • Replies: 10
    • Forum: Finishing
  7. froglips

    Handplane + Sandpaper on glass notes

    I'm a trial and error kind of learner. Sure, I could "READ" or "ASK", but I prefer to touch the stove to see if its hot...... then touch it to see if its still hot...... wash, rise, repeat...... As part of the Hillsborough Orange Woodworkers Meetup, we have been tuning up metal bodied hand...
  8. scsmith42

    Cleaning gunk off of sandpaper

    I made an interesting discovery today, which everybody else probably already knows... Whenever I use a sanding sealer (shellac), and do the sanding between coats, I typically use a small electric sander that takes rectangular sandpaper. Unfortunately, the shellac leaves some gummy deposits on...
  9. eyekode

    Sandpaper storage

    Once upon a time I visited Scott Smith's farm and picked up some QSRO. He threw in a beetle eaten board for free and I have been pondering what to do with it... A couple weekends ago I planed it and I thought the grain was really interesting. It had sap wood on one side so I cut some pieces off...
  10. J

    40 grit sandpaper

    Hey All, I went to Klingspor yesterday and picked up one of their 10lb. boxes of mixed sand paper, on sale for $10 BTW, and got some 40 grit in it, not much, but enough to leave me in a dilemma. What do I use 40 grit for ? The only time that I can think about using it would be on a belt...
  11. K

    Klingspor's sandpaper

    Placing this in the review column but it is really, at least in my pea brain, just an observation. I used Klingspors sand paper for years. Then I stopped:dontknow:. Could not remember why so I decided to start using it again because they support this site. Placed my order over the net from...
    • Keye
    • Thread
    • klingsbors klingspor sandpaper
    • Replies: 24
    • Forum: Reviews
  12. Glennbear

    sandpaper gloat

    A generous woodworking friend told me he had some sanding belts that "still had some life in them", no size was mentioned. Frugal guy that I am I accepted his offer and went to pick them up. When I got home I discovered they might be a little big for my machines :no: :eek: These belts of...
  13. skysharks

    5" hook and loop Sandpaper

    If you were going to need to restock on this type of paper, where would you order from? 50 plus per grit. Thanks MAC
  14. gator

    HF Sandpaper for Pen Turners

    Got my weekly HF e-mail coupons and there was one for the four rolls of sandpaper like you used to get (most places went to a five roll pack) for $20. The HF one is $9. Copy of coupon attached (I hope). George
  15. S

    best place to get drum sander sandpaper

    I recently acquired a US Made Delta 18-36 drum sander. Where is the best place to get sandpaper (for the drum and the conveyor) for it? Thanks, J PS: How 'bout that stealth gloat? :wink_smil
  16. Jon

    Where do you get tyour sandpaper?

    Im looking for a cheaper source for the 5 inch 8 hole hook and loop sandpaper. I have been going to local stores but they sure do seem expensive. Any suggestions on where you get yours would be great. :jiggy:
  17. Ken Massingale

    Better Sandpaper and Customer Service

    I have long been an advocate and user of Mirka Gold sandpaper. After reading raves about RHYNOGRIP (made in Portugal) paper from Industrial Abrasives and needing some fine grits I ordered a couple of 50 count boxes for the 5" 8 hole sanders. After using it for a few weeks I was sold. I do indeed...
  18. H

    Finding sandpaper assortments for sharpening?

    I noticed that there's a lot of places that sell packs of wet/dry sandpaper in one particular grit, but does anyone know where you can find a pack of assorted grits specifically for sharpening? Say, maybe 2-4 of each grit in a pack that ranges from 150-4000? I don't do THAT much sharpening, but...
  19. woodnick

    Sandpaper Sharpening

    I spent today sharpening a new set of chisels. If anyone has not used the “sandpaper” method for sharpening, chisels, plane irons, etc. I can highly recommend it. I used a piece of ¼” plate glass fastened to 2” solid cement block. I fastened it with liquid nails. I then put the whole thing in a...
  20. Jim Murphy

    Sandpaper on CMS?

    I put sandpaper on my sleds to help keep the stock from slipping. My tablesaw miter gauge has sandpaper. Although I have a clamp for my DW705, which I use (sometimes) for precise cuts, I generally slap the board down and cut. This morning, it occurred to me that I might reduce slippage if I...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top