white

  1. Truefire

    Can anyone use short strips of white oak?

    I have some short white oak strips measuring 1"x7" L, 3/8" thick, i have about 41 of them. The wood is grade A1 kiln dried wood. There are no checks or cracks in this wood. It would be great for creating pieces for custom glue ups for woodturners. If you are interested in these strips and are...
  2. dino drosas

    Quarter Sawn White Oak

    I was called to see if I had an interest in buying 250 bf of QSWO. You know what that answer was. It was left over from a office building door project and was stored inside for the last four years. Of course I bought it and it turned out to be about 300 bf. All 8 ft long, planed on both sides...
    • dino drosas
    • Thread
    • oak quarter sawn white
    • Replies: 10
    • Forum: Wood
  3. J

    John White is Coming!

    John White, former manager of FWW's workshop, and noted author of many articles in FWW, in addition to his book "Care and Repair of Shop Machines," will be featured speaker at this months Triangle Woodworker's meeting. The meeting will be this Friday (April 15th) at Klingspor's on Capital Blvd...
  4. Mike Davis

    Got my white belt today...

    in saw sharpening from Bill Anderson at Edwards Mountain Woodworks. Bill is easy going, very full of knowledge and extremely helpful even to a complete beginner like me. I hope to take more classes from him in the future. No pics but it absolutely did happen and I'll make some close ups of...
  5. S

    CL N. Raleigh Air-dried White Oak $2.50/l.ft.

    Woodworkers; White Oak Air Dried - $2 (N. Raleigh) Date: 2011-02-23, 12:20PM EST Reply to: sale-8ejqu-2230242028@craigslist.org [Errors when replying to ads?] Gorgeous White Oak, Air Dried, 4/4 8 Ft. lengths, Random Widths. $2.50 a Lineal Foot. Call Teddy: 919-870-7707 or e-mail...
  6. Rob

    White Oak Pen

    Guy at work had some work done in his house and wanted a pen made from the same wood. White Oak, with gunstock stain on it. Came out much better then I thought it would.
  7. CrealBilly

    White Ash

    Is there any interest in northern white ash? My boys started a 10 acre tract last week that's smack dab in the middle of the Shawnee National Forest. The tract is private owned of course and has a lot of white ash on it and a good amount of cherry (I've already got plans for the cherry - sorry)...
  8. SgtSnafu

    1/4" White pegboard in Greensboro NC

    I believe I found a deal in 1/4" white pegboard. It is at the Habitat For Humanity ReStore, on High-Point Road in Greensboro. If you go, they are in a room off to the left at the rear of the store, where the other building materials and such are... This is the real 1/4" thick stuff (not the...
  9. merrill77

    Two White Oaks

    Last spring, I bought a lot of white oak (mostly QS) for a project from an independent sawyer. I didn't get quite enough for my project (which is a 5-piece set), but I figured I would pick up more when I started the final piece. When I started milling it, I thought "gee, this looks a lot closer...
    • merrill77
    • Thread
    • oaks white
    • Replies: 17
    • Forum: Wood
  10. OaksUnfinished

    OaksUnfinished

    • merrill77
    • Media item
    • oaks two white
    • Comments: 0
    • Category: Member Galleries
  11. OaksFinished

    OaksFinished

    • merrill77
    • Media item
    • oaks two white
    • Comments: 0
    • Category: Member Galleries
  12. D

    FUHR 9560 - White Primer - filler options?

    Anyone working with this primer? I'm wondering what works well as a nail hole filler. Bondo caused the primer to wrinkle. I am doing trim work - pine and poplar. Thanks very much.
    • DonnellyJT
    • Thread
    • 9560 filler fuhr options primer white
    • Replies: 2
    • Forum: Finishing
  13. LloydP

    Source for Northern White Cedar

    I am looking to build a couple of tables to match a cedar bed that we have had for some time. I seem to be having a hard time finding Northern White Cedar lumber. Does anyone know of a good source? Thanks.
    • LloydP
    • Thread
    • cedar northern source white
    • Replies: 3
    • Forum: Wood
  14. dino drosas

    White oak coffee table, WIP

    I got to work of Sunday and processed the quarter sawn white oak that I got from Mountain Sawyers. As I mentioned in my previous post, I plan to build the coffee table featured in the current issue of Fine Woodworking. Thanks go to Gregory for the inspiration. So far I have the base joinery...
  15. zapdafish

    finishing white oak question

    I have been looking into ways to finish white oak and one article recommened danish oil to really pop out the grain. It looks like Danish oil is for indoor use only. Can I then apply an outdoor protected varnish over that? I plan to get a can of each of the following to experiment with but want...
  16. zapdafish

    white oak for outdoor use question

    I was reading up on wood for outdoor use and found that white oak seems like a suitable wood. I was also considering cedar. I just wanted to verify it with you guys. It would be for a grill cart that will be kept under a grill cover but stored outside so I don't think it would be directly...
  17. R

    Quartersawn white oak

    I have 100 - 120 bf ... mostly 12 foot lengths, 3.5 and 6 inch widths. All surfaced 3/4" thick and sanded one side. Very nice stuff. $350 or best offer
    • Ricardo
    • Thread
    • oak quartersawn white white oak
    • Replies: 2
    • Forum: Wood
  18. Dean Maiorano

    'Maine Northern White Cedar' (not mine)

    Here's a link for a guy selling a pile of 'Northern White Cedar' on CL. http://raleigh.craigslist.org/mat/1901860160.html He wants $600 for the pile (everything removed) but I'm doubting he'll get that. If he has enough interest in small lots he might piece it out. I've contacted him and...
  19. W

    3" white cedar timber

    Anyone know where I could find some 2 1/2" to 3 1/2" round post. I don't know if any guys with a mill have the possibility of making these or if there is a good source. The only place I have ever bought round posts from is in Boone and they only carry pine. I am going to make a couple of...
  20. Canuck

    Shellac over White Oak???

    I opened a 1/2 full can of Zinssers Clear Shellac today and proceeded to lay a coat onto the inside of a couple of drawers with oak plywood bottom's and white oak drawer fronts. Sides and back are poplar. After about 5 minutes the oak bottom and the back of the white oak drawer front turned a...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top