panel

  1. S

    Raised Panel Help

    Can someone point/advise me on the right technique for building a raised panel door (small cab)/ I have a set of the MLCS pro panel bits, and checked out their help section, but the information is critically lacking technique. I got the correct profiles for the Stile and Rail and they match...
  2. F

    Grain/curl orientation on frame and panel

    I'm about to start gluing up some frames and panels that I've been working on for a new piece. The panels are veneered with curly bubinga, and the pieces are bookmatched. The curl runs about 25 degrees from horizontal, resulting in a "v-shape" due to the bookmatch. So, the question that I'm...
  3. Bigdog72

    Raised panel doors

    What is the best clamp for use with raised panel doors? F-style or K bodies?
  4. Raising a Panel using Tablesaw Jog

    Raising a Panel using Tablesaw Jog

    Blase is set to 11 degrees and panel raised in four passes
    • McRabbet
    • Media item
    • jig panel
    • Comments: 0
    • Album: My Shop
  5. Backside of Panel Jig

    Backside of Panel Jig

    Backside of Panel Jig
    • McRabbet
    • Media item
    • jog panel
    • Comments: 0
    • Album: My Shop
  6. Back Cutting a Raised Panel

    Back Cutting a Raised Panel

    Using Tablesaw Panel Jig
    • McRabbet
    • Media item
    • jig panel
    • Comments: 0
    • Album: My Shop
  7. Raised Panel Door using Panel Jig

    Raised Panel Door using Panel Jig

    Birch door 33'' high by 24'' wide made on tablesaw using Panel Jig -- used in Walsh Project
    • McRabbet
    • Media item
    • door panel raised
    • Comments: 0
    • Album: My Shop
  8. gdoebs

    Upgrading Electrical Panel

    Hi guys, I'm planning a kitchen remodel and want to add at least one more circuit for small appliances. I'm tired of tripping a circuit if more than one appliance is on... Not to mention, upgrading the panel would allow me to add a nice shop heater from Northern Tool. I know when we bought our...
  9. F

    Frame and panel cabinet construction question

    Pardon my newness here. I'm still lurking a lot and reading up on old threads. I'm looking for a little input from those with more experience here as to which joint you'd prefer to use for standard box construction when using frame and panel construction. Obviously it's not a situation...
  10. J

    Vertical panel saw plans

    I am thinking of building a vertical panel saw and doing some research on them does anybody have any plans or older magazines with plans laying around ? I know that there are sources to buy the plans from, but I don't want to pay for something until I know that it will work for me. Thanks in...
  11. I

    Anyone know where I can get a large panel planed in the Greensboro area?

    At least 30" wide capacity is needed.
  12. T

    Plywood panel and wood movement

    I'm working on a project uses a 1/4" plywood panel about 28" x 18" with plastic laminate on both sides framed with 3/4" wide red oak. Since panel won't be expanding or contracting and the wood movement on the frame will be minimal with the grain, can i just make it a tight fit and glue the...
  13. Bigdog72

    Raised Panel Door Templates

    I am considering buying a set of cathedral door templates from Peachtree. Anyone have any experience with these or other brands? Pros and cons? Thanks in advance for your help!!
  14. Will Goodwin

    Re: Advisory Panel Forum Permissions

    Steve editing the masks fixed the issue. I don't see the advisory panel forum any more. Talk to you in a few days, I hope all goes well.
  15. Douglas Robinson

    Ral CL: Incra panel gauge and Incra 2000 miter gauge - $230 (Youngsville, NC)

    Incra panel gauge and Incra 2000 miter gauge - $230 (Youngsville, NC) Incra panel gauge and Incra 2000 miter gauge Please email or call (919) 562-6094 for further information. http://www.woodcraft.com/family.aspx?familyid=5395 http://www.woodpeck.com/incramiter2k.html...
  16. SteveColes

    Advisory Panel

    Advisory Panel :dontknow: You may have noticed that there have been several members with the added title of "Advisory Panel" and if you notice such things, that the number has increased. I have never made an announcement about that becuase, it wasn't really that active. But now with our...
  17. jsjordan

    Lattice Panel Room Divider Ideas?

    LOML has decided she wants a room divider made from a lattice-style material. We are "negotiating" :wink_smil over the design now as she does not want the traditional folding type. I'm thinking "wall" panels like are used in an office environment for the basic design but shes not quite sold on...
  18. J

    Corner cupboard--door panel raising

    To recap, the project is a walnut corner cupboard. I am working on the bottom which has two doors with birdseye maple panels. Panels were split and bookmatched. Now it is time to bevel the edges so they will fit and float in the door grooves. I tried out several planes, but the LN #62 worked the...
  19. J

    Corner cupboard--door panel scraping

    The birdseye panels were a little rough from their trip through the bandsaw. Since birdseye is prone to tearout, I am scraping them smoothe. This is why you need a LN #112 scraper plane. Of course, sometimes you need to scrape just a little bit. Here is where his little brother, the LN #212...
  20. K

    Woodsmith article on panel glue up

    Anybody read this yet? I found it interesting that the article recommended putting glue on only one edge of the board. When I first started trying to learn woodwoorking in the mid 90's one of the first things I learned was to place glue on both edges. Any thoughts or opinions, like no one...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top