paint

  1. Bas

    Touching up paint on a table saw

    Sort of off-topic.....I bought a new table saw last week (re-gloat...getting extra mileage out of this one!). It works perfectly, but there are three spots on the front rail where the paint is damaged. The damage is very minor - maybe 1/32" square, if that. But, it's pretty deep, goes through...
  2. Splinter

    There is no lead paint on these...

    and they weren't made in China. A fun little project from some white pine I brought from Germany over 7 years ago when we moved back to the US. I think my Grandson might get one for Christmas.:eusa_danc
  3. WoodWrangler

    HVLP Primer & Paint Tips Needed

    Looks like tomorrow I should be in a position to begin spraying the primer (and maybe paint) on the beds I'm building for my daughter. I had read that the HVLP turbine systems in like mine (Wagner FineSpray) wouldn't do good with water-based products like paint ... so I went to Harbor Freight...
  4. J

    paint - prime PT lumber

    I need to put a finish primer and or paint on an arbor. I get a different story from each experts. Has anyone put a finish on PT lumber. Thanks Dwight
  5. Travis Porter

    20 Percent off paint stuff at Amazon

    Through the 13th Amazon has 20 percent off paint equipment and supplies. Of course, I took advantage of it myself. I have one of these on the way.:eusa_danc...
  6. KC7CN

    Garage/Shop Floor - Patching & Paint?

    My garage/shop floor has a lot of cracks. Can anyone share their experience with patching the cracks, and painting the floor? * What kind of paint did you use? (Low-cost garage floor paint from Wal*Mart, more expensive Epoxy's, one or two part) * What did you use to fill the cracks? * Does...
  7. John Reeves

    Paint problems

    LOML wants a glossy black finish on a simple entertainment center. Solid pine that I built 25 years ago. Been in storage and she wants in our son's room. Will be used for books and possibly a TV if his grades get better. Open upper with doors on the lower section. I brushed (no spray set...
  8. woodnick

    Old Latex paint use

    Before you sticker green wood take some old latex paint and dump in in an old container that is as big as your wood, and dip the ends in the paint. This picture is two years old with no spites.
  9. rhett

    paint grade?

    This is a simple box for a christmas present. This is considered "paint" grade at the shop where I build cabinets. I knew there was a reason I kept working there.
  10. T

    White latex paint or water based pigmented lacquer

    After spending 7 hours spraying a large project with one coat of primer and 3 coats of latex I can not help but wonder if I could do it with less coats and get better results using a white pigmented water base lacquer. I recall John talking about it in his finshing class and was wondering if...
  11. T

    New Shop Pictures including "poor man's" paint both

    Check out a poor man's paint booth. The plastic rolls up and ties neatly in the ceiling. Still need to find that explosion proff fan. More new pictures in my album now that I have paneled the walls. Before dropping the paint spray curtains: After dropping the curtains:
  12. rick7938

    Paint removal from plane

    One of the planes that I found in my Grandfather's garage has had paint spilled on the body. Is there anything that may remove paint and not remove the jappaning. I haven't used any type of remover to try to determine if it is oil or latex based. As old as it is, I would bet oil. Any...
  13. T

    Takes longer to paint than to build...HVLP?u

    As I am getting into finishing (painting) my projects it seems that is taking longer to paint them than to build them which is frustrating. :BangHead: :BangHead: To add insult to injury I am not getting the results that I would like. There are brush marks, inconsistant sheens, roller marks...
  14. Monty

    Amazon - 20% off paint supplies

    This was a promotion they had a few months ago, now it's back again. If you've been wanting to get some sprayer equipment, this looks like a pretty good deal! Link
  15. williams130

    Finish for 100% acrylic latex paint

    I have made a small upstairs office in our house and now I'm in the final finishing stages. My question is in regard to the final finish for the bookcase and desks made of MDF, birch plywood, and poplar. Initially I applied a single coat of primer and have followed that with 8 coats of Behr 100%...
  16. walnutjerry

    Milk Paint

    I am getting near the point of painting a project with milk paint, I used it only once before about 7 or 8 years ago. I was not too thrilled with the way it worked. Out of all the people that come to this site there has to be at least one with some "milk paint" experience. Any tips to make it...

Premier Sponsor

Our Sponsors

Top