I have taken on a couple of projects this week one of them is rebuilding and refinishing a Antique Dresser. Unfortunately it has a couple of coats of paint on it and Sanding it down isn't a great option I was wondering if anyone can recommend a good paint remover, preferably a non-toxic kind.
Hi all.
I am in need of some help. Preferring natural wood, I do not normally use paint. However, client (the better half) demands it. I'm making some storage cabinets using southern yellow pine and need to paint them white. So far, I've sealed the wood, added two coats of primer (kilzs), and...
I am looking for recommendations on how to make a paint quality door.
I have a friend who wants to make a custom pantry door with a large piece of frosted and custom lettered glass.
He wants it painted to match the rest of his doors.
I was thinking poplar would be good for this. I imagine we...
It is an oil-based acrylic that I just applied today. Can I top-coat it with an oil-based poly? It's still a little tacky now (painted it at ~3p). If it's dry tomorrow am I good to go? Or should I wait longer? Based on what I recall from Flexner I think I should be ok...but though I would...
My house was built in 1940. the front door and surround has paint on it 1/4" thick. have tried gel stripper, hand scraper, dremel multi-max, randow orbit sander. is there an easy way?
Hello friends,
I have a couple hand-planes that are badly rusted and I am going to electro-clean them. It will take whats left of the original japanning off and I am just going to use some good paint on it. I just cant remember which paint to use. (I used paint on my number 7, it was rusted...
After ten years, the vinyl shutters have to be repainted or replaced. I've heard that there is a type of paint specifically formulated for vinyl. Has anyone heard of such a thing?
Building a double size desk using Poplar and mdf. (I will attach pic if possible.)
I want to spray with black paint and finish with satin clear coat. I have a 4 stage turbine sprayer and have never spray painted before.
Where are some good paint stores to get paint and advice. I am probably...
Hi all,
In the early days, I loved shiny harpsichords. While these instruments did eventually sell, it took a while for me to realize that they didn’t really look like harpsichords. Now, after looking at hundreds of instruments, I have a better idea, and appreciation, for how they should...
Anybody have any success finding paint to match Craftsman power tools? I'm looking for the dark gray they use & I don't know if I won't just hafta go to the BORG & let 'em match me up a quart. Thought somebody might have found a stock color in spray that matches. The 'arn cleaned up pretty...
My wife wants me to spray some outdoor stuff and I don't believe my guns will pull off spraying latex. Any suggestions as to a gun which will work with a compressor? Sad part is, it may not get used much so I don't want to spend a fortune on one.
MIke
I am going to paint my sail boat soon and when I finish, I will finally put a name on it (Kohanna - means "little flower" in Japanese and kind of has my youngest daughter Hannah's name hidden in there), put the license numbers back on and make a reasonable facsimile of the original label...
I want to odor seal a piece of plain 1/2" plywood to go in the bottom of a blanket chest. It will be the sub-floor for a 3/4" aromatic cedar t&g liner.
Can I use some of today's modern "odorless" latex primers or paints instead of milk paint? Would 1 coat of primer be sufficient for the edges...
I spend a couple of hours researching HVLP systems, boy talk about a hot topic! I want to paint this cabinet I'm building, using latex paint. I can do the brush and roller thing, but it's tough to get that real smooth glassy finish that way. So I want a power tool to help me out :-)
I've heard...
In a previous post I asked for help with a high UV protection finish. A pigment free oil base paint by Olympic was suggested. I talked with their technical support and they say they do not make such a product. Talked with Sherwin Williams and they could not help.
Howie, saw that you are...