kitchen

  1. Kitchen Island

    Kitchen Island

  2. Kitchen Island

    Kitchen Island

  3. Kitchen Island

    Kitchen Island

  4. Kitchen Island

    Kitchen Island

  5. Kitchen Island

    Kitchen Island

  6. Kitchen Island

    Kitchen Island

  7. blazeman45

    New Kitchen Cabinets Started (New Pics 01/09)

    The wife asked for new cabinets and counter tops for X-mas!! My first thought was new tools to help me along and she agreed!! :banana:I bought the new Dewalt 718 and finished getting my shop set up like I wanted it!! The cabinets are birch plywood with Cherry face frames. She wanted the look...
  8. Joe Scharle

    Kitchen sliders

    Ordered some of these slides on Monday from Rockler. On sale...free shipping, arrived yesterday. They are floor mounted and form the sides of the drawer. They're replacing the tired 30 year old Rubbermaid's (lower right). Those back screws are hard on an old man! View image in gallery
  9. LeftyTom

    Kitchen Cart Completed

    Thanks to Rick DiNardo for hooking me up with the white oak for the shelves and top, and the ash for the frame. Thanks also to Rick for giving me a big hand in getting the top flat. 35.5" H x 30.5" W x 26 3/4" D. Finish is 3 coats of Waterlox Original Sealer and Finish. Joinery is wood...
  10. ebarr

    Kitchen Countertop Question

    OK, LOML wouldlike to redo the Kitchen countertops, the house was built in 84 and has custom cabinetry. I was looking at the countertops and don't see any visible screws that hold it in place. How hard is this going to be to get off????? without tearing up the cabinetry???
  11. Truefire

    Mobile Kitchen Island wheel casters advice?

    Hey guys i am in the process of building a mobile kitchen island cart and was wondering if you have any suggestions on the types of casters used. I desire to have locking ones that would readily roll on the linoleum floor in the kitchen without leaving indentations. Well of course i understand...
  12. blazeman45

    Outdoor Kitchen & Porch Finished

    It took me almost a year but I finally finished... The porch has an IPE T&G floor with Cypress T&G ceiling... I framed the outdoor kitchen with metal studs, durock, and hardiboard... It has IPE on the front and a Weber Summit Grill which I piped into my bulk tank. We put a granite top on the...
  13. LeftyTom

    Kitchen Cart In Progress

    A few months ago, I got some Ash and Oak from Rick Dinardo. Rick said he didn't want to see nay pic of the wood until it became something. So here is my work in progress kitchen cart. The final dimensions with top mounted are 30" W x 27" deep x 34" high. The top is supposed to end up 1 3/4"...
  14. CrealBilly

    Kitchen Cabinets from the shop of FredP

    Custom SYP kitchen cabinets Work in progress from the shop of Fredp :) 1st we made the kick with shallow drawers Then we made the base to fit on top of the kick The stove is going to fit in the corner so the cabinet has a 45 on the end Then we placed the base on the kick This base...
  15. S

    Kitchen Update

    Finished up a couple of Kitchen projects that upgraded items that the builder put in and added a couple of new touches as well. Before Picture: View image in gallery After: View image in gallery Before: View image in gallery After: View image in gallery WE...
  16. Mike Davis

    Kitchen bar height table FINISHED

    We decided to keep the bar top from the old house and add legs to it for a bar height table. I cut some locust posts from the farm and a special sassafras limb that the kids used to sit in when they were little. Then a couple maple saplings that had vines wrapped around as they grew to make...
  17. R

    painting kitchen cabinets

    I ran a cabinet shop for years and sprayed clear lacquer on stained wood exclusively. Been out of loop for while but trend seems to be painted cabinets now. what kind of paint stands up to kitchen usage. I never sprayed paint but if you can spray clear I think paint must be easier to see and...
  18. DWSmith

    Cherry/Walnut Kitchen Island

    Just delivered this island to a customer today. The cutting surface is 3" x 22" x 42", a cherry center with a walnut border and the lower base is solid cherry. The finish on the cutting surface is mineral oil with a bees wax/mineral oil combination and I used CAB lacquer on the base. The block...
  19. Jim Murphy

    Kitchen table top help

    Well, the sharp, crisp corners on my walnut table top are impressive to me, but I wonder about the impact on grandkids as they impact the table. So... Radius the corners? What dimension? Really rounded, like using a spray can as a gauge? Or just slightly rounded so it's barely noticed...
  20. bluchz

    Kitchen remodel

    About while back i started a kitchen remodel, and am now almost finished. I thought i would post some pics. I did a lot of the work myself in the beginning but got some help from family and friends toward the end.These 2 are the before pictures...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top