finding

  1. K

    Finding the center of green wood...

    How do I do it? I was watching this video and he edits out the part of how he finds the center of the wood. http://lumberjocks.com/alindobra/blog/2719 It looks like he was about to measure in two spots on top of the wood and just do it perpendicular with two lines. I also found this picture...
  2. kooshball

    trouble finding an adapter for my shop-vac to hook to PC 390K sander??

    I have tried all the adapters at lowes and depot and I can't seem to get my new PC 390 to hook to my small shop-vac; any one had this issue or have a good source for adapters?
  3. pbaileyjr

    finding those nasty nails before the blade does

    What brand metal detector is good for checking wood before you run it thru a machine? I've heard "Lumber Wizzard" was good. Are there others used? Thanks for sharing gals and guys.
  4. Tar Heel

    We need some help finding something

    Next Friday I'll have the pork shoulders on the cooker. They have to be chopped after coming off. That pork is going to be HOT so we need two pair of heavy neoprene or rubber coated gloves but can't find a source in the area. Does anyone have any idea where we might get a couple of pair.
  5. C

    need help finding good hardwoods

    I am fairly new to the wood working industry. I am in the Charleston SC area. I am looking for any ideas on where to find rough cut lumber such as HR maple, sepele, walnut, red oak, and cherry. I get it currently through hood distribution 4/4 rough cut. Would like to see if anyone has...
  6. CohibaCris

    Finding large stock...

    I'm a fairly experienced woodworker and carver with a conundrum - I want to break into carving large billets or logs (12" or larger diameter - 3 to 6' lengths) and I've got the proper equipment to get going - except the wood... (minor problem to be sure) So, can anyone help me out with: A...
    • CohibaCris
    • Thread
    • finding large stock
    • Replies: 13
    • Forum: Wood
  7. B

    Need help finding the right grinder

    As of yet do not have a grinder in the shop. Need one to sharpen woodturning tools, along with one to sharpen lawn mower blades, axes, and anything else that might get dull. Would the slow speed grinder be best for all of these needs, or do I buy a variable speed grinder that ranges from 1750...
  8. K

    [How Do I-Main Site] Finding old posts

    Status: Entered Assigned To:: Unassigned ===================================== Is it possible to review all my old posts? If so, how? OK, think I figured it out. Did a search on my forum name.
    • Keye
    • Thread
    • finding imain posts
    • Replies: 2
    • Forum: Help Desk
  9. H

    Finding sandpaper assortments for sharpening?

    I noticed that there's a lot of places that sell packs of wet/dry sandpaper in one particular grit, but does anyone know where you can find a pack of assorted grits specifically for sharpening? Say, maybe 2-4 of each grit in a pack that ranges from 150-4000? I don't do THAT much sharpening, but...
  10. taandctran

    Need Help Finding Live Center

    I received this lathe from Jim Thomasson today (thanks again Jim), and I need a live center for the tail stock... Anyone that has one of these lathe please tell me if you know where I can get one.... I know they make them becouse my step dad has one just like it and has a live center for his....
  11. NZAPP1

    Help needed finding instruction manual

    Does anyone have the instruction manual for the older HF or Rockler dovetail jig like this with the dual slides? If so could you send me a copy? DOVETAIL MACHINE
  12. SteveColes

    Finding lost photo's

    Besides looking in the lostPictures gallery, there are other ways to find lost pictures and/or albums. Mike asked me how in the thread that started this and I gave a short non-informative answer. Sorry Mike, :eusa_pray I can't put together a standard procedure for how to do this, it is a...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top