chairs

  1. skysharks

    Dining Room Chairs -Plans?

    Hey all Well last year I built my wife a dining room table out of Walnut. This year she gets the chairs.:eusa_danc However I have not built any chairs of that style before. Only chairs that I have built have been Adirondacks.:eusa_thin Has anyone got a set, or can turn me in a good direction...
  2. F

    adirondack bar chairs

    looking someone that builds them or where i can get plans for them,,, Thanks in advance!,,J.D.
  3. Matching Continuous Arm Windsors

    Matching Continuous Arm Windsors

    The chairs are crafted using traditional hand tools and methods along with some contemporary methods. They are finished with the traditional milk paint topped with boiled linseed oil.
    • walnutjerry
    • Media item
    • chair chairs windsor
    • Comments: 0
    • Category: Chairs and rockers - 2010 Calendar Contest
  4. J

    Bar/Deck Chairs

    Made from Lyptus (heartwood & sapwood). Made this for LOML (the throne from which I will get/take orders). My first two (2) were made from cypress for my son and daughter-in-law in Va Beach; they're about 1 year old and were unfinished so now they're taking on a nice pewter gray patina on their...
  5. froglips

    Adirondack Chairs - Halfway point.....

    The Hillsborough Orange Woodworkers (HOW) Meetup has been making quite a bit of headway in our ambitious plans to group build Adirondack Chairs. Our goal is to build 6 chair/ottoman sets. With over 200 board feet of Cypress jointed and planed, whew, we have rough cut about half of the parts...
  6. PeteM

    Rocking Chairs

    Well, my attempt at learning how to build rocking chairs is progressing slowly but steadily. The small one is cherry and will be a present for my granddaughter. The larger one is made from SPY 2x6's from the BORG. It fits me pretty well so it will be my "shop rocker" for a while. I think the...
  7. Tiffany

    Stripping Chairs...

    I bought some chairs off Craig's list a few weeks ago that I want to refinish. They are nice, sturdy chairs, but the original finish was scratched and so the previous owners decided to spray paint them black and did a horrible job. So, I have black spray paint on top of I'm not sure what kind...
  8. ptt49er

    Adirondack Chairs and frustration!!

    Since I started our garden a couple of weeks ago, we've been itching for somewhere to sit outside. Well what else does an amateur wood worker do but decide to build a pair of Adirondack chairs. So I did some digging and found this chair with free plans online. It's called Jake's Chair and you...
  9. dancam

    Morris Chairs, Ottoman and A&C Table and Frame

    Well I finally got the cushions back from the upholsterer and the finish on the chairs and table. These chairs were a fun project and I was fortunate to get a real nice batch of QSWO from Mountain Sawyers in Fletcher, NC. The chairs were a mixture of plans from FWW and Woodsmith...I took the...
  10. alleng

    Another set of Chairs finished

    Here is the lastest set of chairs ready for delivery. Now I am out of lumber and have to make a lumber run and start all over again!!
  11. J

    Jacqueline's chairs

    The first picture is of the parts for 4 chairs laying on my table saw. They are sanded and the 88 mortise and tenon joints are fitted but assembly has not started. The wood is #1 cherry. The next picture shows the assembly of the side frames. This is the easy part. The next assembly...
  12. J

    Jacqueline's Table, start of chairs

    I just posted some pictures to my gallery and I'll put a few in this thread. I am making a table of cherry from The Moulding Source in Mooresville, NC. I got the cherry for less than $2/bd ft. The table plans are a modification of those in Woodsmith number 15 and the same as I built my son in...
  13. WoodWrangler

    Little Chairs

    My daughter has been using some el cheapo plastic chairs for some time. Two have already broken, and the other two are on their last legs. They also aren't so safe when my daughter climbs up on them ... so I decided to make her more. At first I was going to do four, but decided to build two...
  14. J

    Tom's Chairs

    This post is about a couple chairs I built for my son Tom. They are oak and are based upon plans in Woodsmith 15, May 1981. The wedges in the six through mortise and tenon joints are walnut. There are also 8 blind mortise and tenon joints in each chair. My secondary purpose for this post is to...
  15. steviegwood

    Need Kitchen Chairs

    Hi Y'all, I am looking for someone who makes kitchen chairs.My mother is a very large woman in bad health (over 400lbs). she is on a fixed income as am I but I am looking to possibly getting her four kitchen chairs for Christmas if I can afford them. I am not looking for anything fancy just...
  16. Combback Windsor Chair

    Combback Windsor Chair

    Handcrafted comback windsor using traditional methods. The seat is African Mahogany with Ash used on the remainder of the chair.
    • walnutjerry
    • Media item
    • chairs windsor
    • Comments: 2
    • Category: Rockers, Chairs, etc.
  17. JackLeg

    Deacon's Bench & High Patio Chairs

    Anyone ever built a Deacon's Bench? If so, where'd you find the plans? Looks like there are several types. Also, how about some high patio chairs and round table set. Maybe Adirondack style. Thanks in advance for all help and suggestions. :notworthy:
  18. Adirondack Chairs

    Adirondack Chairs

    Almost done back and set completed
    • skysharks
    • Media item
    • adirondack chairs
    • Comments: 0
    • Category: Furniture Projects
  19. Ralrick

    Bought a porch, need some chairs

    My wife and I signed a contract on a log cabin overlooking the lake this weekend. The cabin has an absolutely beautiful view and a front porch that is begging for some Adirondack chairs . . . . I think I remember someone here on NCWoodworker that was sharing templates for a chair they designed...
  20. Windsor Sackback Settee

    Windsor Sackback Settee

    African Mahogany seat with Red Oak back and undercarriage. 48"L x 20"D x 36"H Handcrafted using a combination of traditional and contemporary methods.
    • walnutjerry
    • Media item
    • bench chairs furniture windsor
    • Comments: 0
    • Category: Winning Entries!

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top