bottle

  1. Stoppers made for a craft show

    Stoppers made for a craft show

    Four of the stoppers lined up. Stainless steel stoppers from Craft Supplies USA
  2. Vetteman9956

    Wife's first Bottle Stopper

    Cathy did her first bottle stopper and gave it to her sister. Check out her pictures in her member gallery. It's under Cathy Ports. She got the blanks from David F before he went back to England. I have to say I'm very impressed by her first try. Think shes going down the slope very quickly.
  3. PChristy

    Just a friendly reminder for the bottle stoppers(update)

    This is who I have recieved $$ from so far - if I have missed someone please let me know where and how you sent it to me - I would like to get all this done before the picnic so I can have the kits there - Thanks Phillip dlrion dpsnyder Doug dust storm gritz Scott woodartz jpr28056 ebrant...
  4. PChristy

    New Thread for Bottle Stoppers(Update)

    Thought that I would start a new thread - seems like the other one has stalled at the gate- another reason is to make sure that all of the ones that have ordered the kits will see this - I have sent each one of you a PM with your total and the PayPal info - if you do not do PayPal send me a PM...
  5. Sharp Blade

    My early glost bit me in the azzzzzprin bottle

    Yeah, so the story is that either they got my message wrong or they just didn't load my band saw on the truck this morning. They can guarantee that it will be on the tuck for delivery tomorrow. Between 9AM and 3PM. Nice long woindow there guys! Glad I have nothing to do except re-arrange the...
  6. PChristy

    Bottle Stopper Group Buy- (update please read last post )

    Last year - Around Sept.I got together a group buy on some bottle stoppers and alot of the guys here got in on it - I mentioned that I would try and get another one up around March/April - This is where we ordered them from for ll of the new members here http://www.torne-lignum.com/stoppers.htm...
  7. Matt Schnurbusch

    French Glue Bottle

    I think I have found the greatest glue bottle ever invented. For years I have used a Titebond bottle with the pull-up cap. It works OK, but how many times have you been gluing something up and looked over at your glue bottle to see glue streaming down the cap, and side making a gigantic...
  8. WoodWrangler

    First Bottle Stoppers

    First, let me thank PChristy for putting together the bottle stopper purchase and for letting me buy-in a bit late. Not only am I sold on Ruth's stoppers, I actually enjoy the idea of this "little" lathe project. Now, before you look at these understand (1) I'm a rookie turner and (2) a virgin...
  9. PChristy

    Bottle stopper makers look what I have

    Arrived today:eusa_danc View image in gallery Will start sorting them out today - Since I am not working:BangHead: Now I really need to sale these stoppers
  10. PChristy

    Bottle stopper bulk purchasers please read(UPDATE)

    I have everyones money now and I need to wait until tomorrow evening to let everything clear then I will be ordering them:eusa_danc I thought I could order tonight but everything has not cleared yet -
  11. PChristy

    Bottle Stopper bulk purchase?(update x2)

    Not to take away anything from Jack(flyrod444) But I really REALLY like his stoppers http://www.ncwoodworker.net/forums/f32/few-stoppers-25034/ and the kits that he ordered from http://www.torne-lignum.com/stoppers.html which are made in the USA:eusa_danc I went to the kit site and I noticed...
  12. PChristy

    Bottle Stopper makers question

    I turned a bottle stopper tonight out of Macadameon Nut (I don't think that is spelled right) any way after I got through with it I tried to take it off and it was so tight it would not move AT ALL:no: Anyone ever had that problem
  13. PChristy

    Clear Bottle Stoppers

    I have looked at several sites that sale the clear bottle stopper blanks that have things inside of the blank ex: sea shells, flags, fishing flies, etc. But I have not found where you can buy the acrylic. I am wanting to make the blank with somethings that I have in mine - has anyone made...
  14. PChristy

    The Cork Bottle stopper

    Have any of you made any bottle stoppers using the Cork Stopper kits - my wife says that she would not use them because they would be hard to clean - any comments?
  15. Mark Stewart

    Bottle stopper blanks

    Hi there folks. I am looking for a new supplier of bottle stopper blanks The people I have been buyin from are moving away. Thanks Mark
  16. PChristy

    Finally a pic of the BOW bottle stopper(update)

    I tried to update the other thread that I started but couldn't find where you could edit the title - This is a couple of the BOW stoppers that I turned the one that is assembled is the one that stopped about a 32nd before being tight against the bottom - it has CA glue in it This is the...
  17. PChristy

    Bottle Stopper makers

    When you do the final assembly by applying either the Epoxy or the CA and then turn the stopper into the top does any of yours get real tight about 75% of the way in? If so how do you get it to turn the rest of the way in?
  18. dpsnyder

    My 2nd turning lesson - bottle stoppers

    Just finished up lesson #2 at the WoodArtz school of woodturning :gar-Bi Tried my hand at a bottle stopper. Used a piece of the leftover Lyptus wood from a previous project. I won't post every little project, but this was a milestone for me. Here's the pic... Enjoy, Dan
  19. PChristy

    Bottle Stoppers (WIP)

    Left to right WO Zebra Crab Apple Zebra
  20. PChristy

    Wood for bottle stoppers

    I have tried some different woods with the bottle stoppers and I have found out that some do not hold the thread very well - I have used White Oak Mahogany Yellow Pine Sapele I think it is Soft Maple With the first two holding the thread and not stripping out When I got my tap at the BORG it...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top