sealing

  1. CLetts

    Sealing Log Ends

    If I want to seal the ends of a log, do I need to buy the wax or will latex paint work?:dontknow:
  2. ChrisMathes

    Sealing workshop from rest of house

    Hey All, I've been out of the workshop for a while because we had our house for sale, sold it and have moved into a rental. We are in the process of building a new workshop with a home attached. My new shop will still be relatively small, but overall, give me more area than my shed. The...
  3. F

    sealing with sprayed shellac

    This is the first time I've worked with shellac, and I'm spraying it over an transtint dye that was followed with an application of wet-sanded danish oil to pop the grain and fill the pores. I let the danish oil cure for three days prior to spraying the shellac. I'll be following the shellac...
  4. L

    sealing turning blocks

    My son in law has some Pecan that he is cutting up for firewood. Some of the pieces are big enough I figured I could get some turning blanks out of it. After I saw it into blocks Do I seal it on all sides or just the end grain? And what product is best for sealing? Thanks, Jeff
  5. Mark Stewart

    sealing a green turned piece.

    If I turn green wood to finished size what should I seal it with on the inside and outside? I plan to turn some and let them dry slow but I will also turn some "ART" as daveo is fond of saying. Thanks Mark
  6. Canuck

    Sealing a Tree Root?

    I have a neighbor that has a large Pin Oak close to his driveway and the roots have started to cause a good sized heave in the concrete driveway.:tinysmile_cry_t: He is thinking of having the driveway resurfaced which means cutting a couple of the sprays of root (about 3-5" in diameter). If...
  7. S

    Sealing green wood

    My neighbor and I cut some trees today and some of them were good size Wild Cherry. I'm out of Anchor Seal and will not be able to get any for a few day. What can use instead, something I can get at Lowe's?:-?
  8. sapwood

    Sealing western cedar

    I want to seal or fill the cracks/knots in some western cedar. Looking "rustic" is ok, but deterioration isn't. Size varies from 9" wide x 1/2" thick to 7" wide x 1" think. The finish will probably be BLO/Shellac/Danish Oil or some combination of those. Looky here: And here: TIA :-) Roger
  9. J

    Sealing Door Edges

    I need to seal the edges of a cheap wood/masonite bifold door that will be painted on both front and back with oil-based paint. I am thinking about using a couple of coats of polyurethane. Does this work or is there a better techniques?
  10. DaveO

    Shop sealing???

    Not to steal KC7CN's thread on concrete crack repair, but inspired by it to bring up an issue that I have, I start this new one. I have had enough, every time we get a significant rain, like we have been having today in the Triangle (non-stop from just before daylight to present) I get water in...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top