finishes
-
Heart Pine Finishing...with what
Okay I tried researching for an answer and found pleanty of internet todos and not do. Even talked with my local store and not sure they want to give me advise because of the Heart Pine and possible pitchiness or what i think is sap. I hit a pocket of sap it was try but yellow dust was tacky... -
D
General Finishes
Does any one know of a Charlotte source for General Finishes? Any other ides for a water base paint in white for furniture finishing -
J
Waterborne Finishes & HVLP Spraying
This is informative. The Earlex product line is very good and you can get a model 5500 for about $320. It's a good starter unit if you want to try spray finishing. http://thewoodwhisperer.com/waterborne-finishes-hvlp/ A couple of refrigerator/freezer cardboard boxes cut open work nicely... -
Scroll Saw table top finishes and care questions
Picked up a Delta 40-601 a week or so back off of a CL listing, paid a little less than they wanted for it and all of the functions work as expected so I guess it was a good deal. So far my skills are rather sad, but I'm trying so that's a good thing. :cool: Anyways, my question is about the...- Ken Kimbrell
- Thread
- care finishes questions scroll table top
- Replies: 18
- Forum: Scrollsaw Work
-
J
Outdoor Finishes
Just saw this informative article to share with you folks. There's also some good links within. http://thewoodwhisperer.com/pondering-outdoor-finishes/ To finish (and with what) or not to finish? Personal preference? Customer preference? No maintenance or regular maintenance? :dontknow: -
T
Delamination of General Finishes ? HELP ?
I am applying General Finishes: Seal-A-Cell followed by Topcoat Oil & Ureathane, sanding between coats with 0-0-0-0 steel wool. When sanding I have found that the previous Topcoats and Seal-A-Cell are delaminating down to the bare wood. I have used GF for years with no problems following the... -
Steel Wool and Satin Finishes
Hi all, I've always had a problem with satin finishes. Currently, I'm working on a harpsichord that will have walnut keys instead of my usual ebony. I've never really cared for finish materials that have flattening agents to kill the gloss as they always look cloudy to me. On the other hand... -
RPM Wood Finishes Group Factory Fire in Hudson
They produce the Mohawk finshes line there. Glad the fire didn't get to the Nitrocelluose. This will impact their business. Looks like a big loss. http://www.wcnc.com/home/Chemical-plant-fire-forces-evacuations-in-Caldwell-County-122778109.html -
Food Safe Finishes
Good article in this month's Woodsmith about foodsafe finishes. I learned from it! :wsmile: -
Earthpaint Wood Finishes
Wood Finish, Dave Fortners Oak and Maple Chairs. Bio Poly NT made the grain really pop. Chairs didnt' dry out and are used every day.- Tom Rioux
- Media item
- beeswax finishes linseed oil rubbing tung wood
- Comments: 0
- Category: Member Galleries
-
Earthpaint Wood Finishes
Wood Finish applied by Dave Fortner. Bio Poly NT brought out the Tiger Maple without darkening the light colored maple wood. Stunning Chairs. Oak posts were fumed first.- Tom Rioux
- Media item
- beeswax finishes linseed oil rubbing tung wood
- Comments: 0
- Category: Member Galleries
-
Earthpaint Wood Finishes
Wood Finish, Sheen example of Looking Glass Beeswax Polish.- Tom Rioux
- Media item
- beeswax finishes linseed oil rubbing tung wood
- Comments: 0
- Category: Member Galleries
-
Earthpaint Wood Finishes
Grain Illumination by Bio Poly NT then Top Coated with Looking Glass Beeswax Polish. www.earthpaint.net- Tom Rioux
- Media item
- beeswax finishes linseed oil rubbing tung wood
- Comments: 0
- Category: Member Galleries
-
Earthpaint Wood Finishes
Different Wood Finishes available from Earthpaint. www.earthpaint.net- Tom Rioux
- Media item
- beeswax finishes linseed oil rubbing tung wood
- Comments: 0
- Category: Member Galleries
-
Water based finishes
I would like to share a water based finishing system from target coatings (targetcoatings.com) that I think is not just as good, but better than any other I have used. I started out using waterlox oil based on cabinets, urethane based for high traffic and a nice french polish with dewaxed... -
USFS Moisture-excluding Effectiveness of Finishes
table of info from the USFS labs- jimithy
- Media item
- effectiveness emc excluding finishes mc moisture of polyurethane usfs
- Comments: 0
- Category: Member Galleries
-
F
pre-cat lacquer over General Finishes Armour Seal?
For the life of me, I hate GF Armour Seal. It looks great when it's first applied and wet, and then it sucks every bit of floating dust out of the air for miles around. And I still can't figure out how to apply it properly. Is is a "wipe on and leave" or is it a "wipe on and wipe off"? The... -
Tips for applying wipe-on-varnish type finishes
Been putting what seems like hundreds of coats of Waterlox on this blanket chest and was wondering if I was doing anything wrong or sub-optimally. Could you guys run through your techniques and procedures for a wipe on finish? What I've been doing: I use a clean rag, folded up several times... -
Advice Please on Exterior Finishes
Hi Y'all, this time of year I get a lot of requests for crosses for Memorial Day. I would like to keep the natural look of the wood and will be using; Aromatic Red Cedar, walnut, cherry, hickory, red oak, maple, poplar, pine. I have made some crosses in the past and heavily coated them with...- steviegwood
- Thread
- advice exterior finishes
- Replies: 8
- Forum: Finishing
-
vINEGAR PAINTING WOOD FINISHES
I was brewing up a bit of strong tea to stain the money box of a bank I made for the grand-dau. It gives a nice color and is non-toxic, I like that. Whie in the kitchen I saw some apple cider vinega and wondered how that would do as a stain, and if it would damage the wood at all, citric acid...- JOAT
- Thread
- finishes painting vinegar wood
- Replies: 2
- Forum: "How To" Forum
Premier Sponsor
Our Sponsors
LATEST FOR SALE LISTINGS
-
Pending For Sale - SawStop PCS cast iron wings
- Started by Warped Woodwerks
- Replies: 0
-
-
-
-