Designed and modeled using two Stickley pieces with a mix of Maloof inspiration. The stickley Harvey Ellis Entertainment Console served as the base inspiration and the Stickley Gathering table for the two tier top portion. The sides are Maloof inspired along with the rounded legs. The soundbar will fit inside the hole in the top section and all cables can be beatly maintained inside. There are access holes in the inside portion of the top for cables to other electronics. The doors are on European sliding hinges from Rockler. Each door is bookmatched. And both use the same piece of wood. The piece is Sapele with a mahogany plywood back and finished with Waterlox. This was my first time making a case goods piece and first time making doors. The Sapele was 4/4 but finished out at 1” thick so this piece is really heavy. The two top pieces are a single board.