wheel

  1. Truefire

    Mobile Kitchen Island wheel casters advice?

    Hey guys i am in the process of building a mobile kitchen island cart and was wondering if you have any suggestions on the types of casters used. I desire to have locking ones that would readily roll on the linoleum floor in the kitchen without leaving indentations. Well of course i understand...
  2. AmishWarlord

    3 Wheel Band Saws

    I saw a Delta band saw for sell on Craig's List. However looking for reviews on it I saw "3 Wheelers are bad!" over and over. Is this true or just a myth? http://charlotte.craigslist.org/tls/2616474476.html
  3. CatButler

    Treadle lathe update 2: I made the wheel go round

    It's been a while since I made an update, but I have made progress. I got the basics of the lathe handed through Carved Tones. I thin I was at least the 4th owner of this thing. I cleaned up the joints and stabilized some things, but wanted something a bit more modern for the spindle. I...
  4. dino drosas

    Three Wheel Band Saw - A Shamfull Gloat

    I have a 24" Laguna band saw and keep a wide carbide tipped installed. Anytime any curved cuts are needed a blade change is required along with readjusting the guides. I decided that a small band saw would be a good addition to the shop. The odds of my winning the one at the picnic were...
  5. Glennbear

    Rasp Wheel ?

    I have an outside DIY project that entails removing sapling stumps and I would rather not get into the hassle of digging and axe chopping. My thought was to use an angle grinder ( I have a 4.5 inch and a larger auto body shop model) I had thought I had seen metal wheels for these type of...
  6. Joe Scharle

    Hand wheel

    Who's had good luck and where, please. Specifically, I want for bandsaw tensioning.
  7. FredP

    spinning wheel?

    I have just been handed a bag full of parts that somewhat resemble a quite old spinning wheel. not only are some parts missing there are additional parts that I don't think ever went with this thing.:dontknow: anyone got pics of what a [I'm guessing] 19th century spinning wheel should look like...
  8. K

    Looking for wood and help for a spinning wheel

    I am totally new to this and may be way over my head with this project. I am looking to make a spinning wheel for my wife. I've got these plans http://www.craftsmanspace.com/Free%20projects/Spinning%20Wheel.pdf I am in need of the wood and help with the tools as well as guidance/mentoring...
  9. froglips

    Bandsaw wheel, how round does it need to be?

    Yes, I have a power tool issue! My 20 year old used Shopsmith bandsaw has an issue. Once ever revolution, the blade would go slack. I eventually traced it to the wheels being out of round. Odds are good this bandsaw was left under tension for many years prior to my bringing it home...
  10. Mr. Lahey

    Veritas Wheel Marking Gauge-opinions?

    This looks like a really nice gauge, I'm thinking of ordering one. I really like the fact that you can get it graduated. Anyone have one of these? http://www.leevalley.com/wood/page.aspx?c=2&p=59455&cat=1,42936
  11. froglips

    Gloat: Blacksmith Pedal Grinding Wheel

    I was at an auction the other night, and what did my bidding card bring home? A little ole grinding wheel! The base is rock solid and the wheel is not cracked. Thanks to Woodartz for helping me move it. For those who wonder, tis sitting center in my living room, where it rightfully...
  12. PChristy

    Wheel Barrow Handles

    Anyone got a suggestion on what would be the best wood to make some new handles for our wheel barrow
    • PChristy
    • Thread
    • barrow handles wheel
    • Replies: 16
    • Forum: Wood
  13. D

    Jet Jointer Free play on infeed table wheel

    I have used this jointer for about 10 years and flattened thousands of board feet, but now there is a gradual freeplay in the infeed handle.. I have to turn the handle almost a full 360 degrees to make any change in the infeed table height.. Does anyone know how I tighten up this freeplay...
  14. S

    Bench grinder wheel wobble question

    I am just discovering how important it is to have sharp cutting tools and have brought a new 8" Ryobi bench grinder from Home Depot. I had a very old grinder that I was not sure about the trueness of the shafts. It had LOTS of vibration like if it was not bolted down it would dance all over...
    • sasjzl
    • Thread
    • bench grinder question vibration wheel wobble
    • Replies: 5
    • Forum: Woodturning
  15. roberta vasgar

    repairing old spinning wheel

    is there any one in the crystal coast area that could make parts for a very old spinning wheel.. would love names of any books with info about spinning wheels thanks..
  16. T

    Bandsaw Wheel

    First off, I am a newbie. So if I mess up, somebody hollar at me. If you ever heard the saying about being careful what you ask for, well I thought I'd look for woodworking tools and found some. Two Dewalt Radial Arm Saws Walker Turner Bandsaw and Drill Press HB Smith Jointer Powermatic Planer...
  17. michaelgarner

    Depth Adjusment Wheel Screw For a Bailey #3

    I find myself needing the screw for my bailey #3 (it’s the screw that holds the big brass knob behind the frog) I was wondering if anyone had some donor/salvage planes that I could buy one from. If it has the Brass wheel with it that’s cool, and if it doesn’t I have one that I can use. Thanks in...
  18. Badabing

    New grinding wheel problem

    Need some help :eusa_doh: I have an 8'' variable speed bench grinder. I'm using it mostly to sharpen lathe tools. It came with a 60 grit gray wheel and a wire wheel. I thought I'd replace the wire wheel with a white aluminum oxide wheel so today I got a Camel brand 8'' white AO wheel...
  19. J

    Delta band saw wheel bearings

    Does anyone know of a local(Raleigh) source for wheel bearings for a 14" Delta band saw? I prefer local merchants even if they are a little higher in price. Also looking for a jointer blade sharpening service.
  20. woodArtz

    Wobbly grinder wheel

    I have a 8" Delta grinder that was just fine until I changed out one of the the stock wheels for a 150 grit Norton wheel(AL2 O3). The new wheel wobbles like crazy. I've tried reinstalling to no avail. Anyone out there experince a similar issue? Any thoughts on how to remedy the wobble? Maybe I...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top