splitter

  1. Mike Davis

    Electric log splitter

    Does anyone here have an electric log splitter? I'm beginning to think I'm not made of steel and could use some help with the firewood. Maybe if we had an easy way to split wood the wife and kids would help... So, what is a good brand? do they hold up well? Split tough wood easily? What is...
  2. W

    Delta Uniguard and splitter

    Am thinking about getting the Delta uniguard cover with splitter for my unisaw. Anyone out there have one and how do u like it? Pros ans cons? Alternatives? Thanx.
  3. kooshball

    Aftermarket riving knife (BORK) vs. fixed shark guard splitter?

    After experiencing my first table saw accident (while ripping, an off-cut came off the blade funny, got into the back of the blade, slid up on the blade then got a final max-velocity push from the front of the blade into my stomach) I am planning to do some safety upgrades. I am fine BTW, just...
  4. SgtSnafu

    Table Saw Splitter..

    Hey Everyone, Anyone had any experience with the Micro Jig Splitter Steel Pro System? http://www.microjig.com/products/mj-splitter-steel-pro/design-concept.shtml What are your thoughts? What are good alternatives? Thanks in advance for your time...
  5. Dean Maiorano

    MJ splitter - is it safe?

    Micro Jig's table saw splitter system...is it safe? http://www.microjig.com/products/mj-splitter-steel-pro/design-concept.shtml NOTE - as mentioned elsewhere in forums, splitters only do so much. There are numerous options and additional safety steps that need to be taken to ensure against...
  6. NCPete

    new user "splitter"

    As i was reading his response to my thread on the Jet Mortising Machine line boring attachment, i clicked on the link in it which lead me to LuCong Manufacturing, a Chinese equipment manufacturer. This would not have bothered me until, as I tried to edit the broken link, I realized that the...
  7. N

    Grizzly 1023 aftermarket splitter suggestions

    I actually still use the 10+ year old original blade guard on my G1023. However it is quite flimsy and I'd like to make a safety upgrade. Is there any real alternative to the Shark Guard at $150? The cost id OK the only thing that gives me pause is that the rear end of plastic doesn't fully...
  8. Saw_Guard_002

    Saw_Guard_002

    • Joe Scharle
    • Media item
    • mod splitter
    • Comments: 0
    • Album: Jigs & such
  9. Glennbear

    Log Splitter Recall

    The CPSC has announced a recall of certain MTD log splitters: http://www.cpsc.gov/cpscpub/prerel/prhtml10/10062.html
  10. jamie

    After-market splitter for Jet Table Saw?

    I remember a (long) while back I saw an ad for an aftermarket splitter that could be used on a jet tablesaw. I think it was a merlin or something. I can't find if they still make these. does anyone know of an aftermarket splitter/anti-kickback/blade guard for a Jet Cabinet Saw? The one...
  11. rick7938

    Table Saw Splitter

    I recently installed a home-made splitter on my zero-clearance table saw insert to assist in ripping wood. Is there any reason to remove the splitter for cross-cuts, or is it OK to leave in place? Any safety concerns for crosscuts?
  12. Bigdog72

    Biesemeyer Splitter

    I have a left tilt Delta Unisaw and I purchased the Biesemeyer 78-431 splitter fpr safety. I am having some difficulty installing and wondered if anyone is familiar with this gadget. Two bolts attach this thing, one straight and one slotted for adjustment. After snugging up the two bolts, it...
  13. mburke911

    Biesemeyer splitter on a Dewalt DW746

    Hello, Has anyone tried to mount a biesemeyer T-Square Anti-Kickback Splitter (similar to this one: http://www.amazon.com/Delta-Biesemeyer-T-Square-Anti-Kickback-78-961/dp/B000RFRLQO/ref=pd_bbs_sr_1?ie=UTF8&s=hi&qid=1200863302&sr=8-1 ) on a Dewalt DW746 table saw? If so how did you do it and...
  14. ZC-Insert and Splitter

    ZC-Insert and Splitter

    Shop-made zero clearance insert and splitter.
    • KC7CN
    • Media item
    • insert splitter zc zero-clearance
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  15. ZC-Insert and Splitter

    ZC-Insert and Splitter

    Shop-made Poly plastic Zero-Clearance Insert and Aluminum Splitter
    • KC7CN
    • Media item
    • insert splitter zc zero-clearance
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  16. Splitter Installed

    Splitter Installed

    Splitter connects to guard post with existing bolt and fender washer.
    • KC7CN
    • Media item
    • aluminum splitter
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  17. Guard Mounting Bolt

    Guard Mounting Bolt

    • KC7CN
    • Media item
    • aluminum splitter
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  18. Aluminum Splitter

    Aluminum Splitter

    Splitter is made from 1/8'' right-angle Aluminum. The table saw guard bolt is used to secure the splitter. The bolt goes through the slot; the hole is not used.
    • KC7CN
    • Media item
    • aluminum splitter
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  19. Aluminum Splitter

    Aluminum Splitter

    PowerMatic 64A shop-made splitter mounts to table saw guard bolt.
    • KC7CN
    • Media item
    • aluminum clearance insert splitter zc zero
    • Comments: 0
    • Album: PowerMatic 64A Table Saw - Shop Made Accessories
  20. Tarhead

    Shorty Splitter from Leeway Workshop

    I ordered and received a "Shorty Splitter" and ratchet handle from Lee Styron right before Christmas and have been using it alot. The splitter is short (adjustable from 1/4" to max of 5/8" above the throat plate) and is .090" thick so it matches up with thin kerf blades. The ratchet handle takes...
    • Tarhead
    • Thread
    • leeway shorty splitter workshop
    • Replies: 9
    • Forum: Reviews

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top