recommendation

  1. C

    Dovetail Chisel Recommendation

    Blue Spruce http://www.bluesprucetoolworks.com/cgi/commerce.cgi?preadd=action&key=DT.250 , Matsamura (Japan Woodworker) http://www.japanwoodworker.com/dept.asp?s=JapanWoodworker&dept_id=12781 , other recommendations? Used would be great. I don't want to try to modify one of my bench...
  2. mike_wood

    Structural Engineer Recommendation

    I need a recommendation for a structural engineer to evaluate my daughter's house. It is a 3 story house and they just discovered the 2nd and 3rd floor load bearing walls are ~1 ft off from the bottom floor load bearing wall. This house is located near Cary. If anyone has a suggestion I will...
  3. Tar Heel

    I need a recommendation

    Three yrs ago I bought a used unisaw. It had a new Square D on-off switch that was, nevertheless, faulty. Sometimes it would start after depressing the on switch and other times it wouldn't. I disassembled it and tinkered with it and it worked OK for a short while. I bought another one (same...
  4. ScottM

    10" plywood blade recommendation

    I am looking for recommendations for a 10" plywood blade that won't break the bank. I am thinking in the $50.00 - $60.00 price range but I have a little fexibility. I don't have the cash to buy a new Forrest blade.
  5. sapwood

    Roofer recommendation

    Anyone have recommendations for roofer in RTP area, please PM. My home is around 2000 sq ft with low pitch, simple roof. May need to replace some fascia boards and reflash chimney. Thanks in advance, Roger
  6. Bigdog72

    Benchtop Belt/Disk Sander recommendation

    I am thinking I need one of these belt/disk combos. Can anyone tell me what they like and how they use this tool?
  7. DaveO

    Plumber recommendation...

    or help. I have some plumbing issues (in my house :lol:) that are beyond my realm of knowledge and skill (very limited). Anyone in the Clayton/Raleigh area know of a good and inexpensive plumber they could recommend? I would love to find someone who could give me an idea of what is going on, and...
  8. C

    Circ saw Combo Blade Recommendation

    I have only used the blade that came with my circ saw. Results are so-so. I'd like recommendations for a combo blade. I only use the circ saw for cross-cutting rough stock (I don't have a slider) and for plywood cuts with a guide. Chuck
  9. tdhetrick

    Screw recommendation?

    Does anyone have a good recommendation for wood screws that you can buy locally? I know this sounds like a weird question but I have been looking at Mc Feely’s http://www.mcfeelys.com/ square drive screws online, but can not bring my self to pay $8.00 in shipping for $24 in screws. I am looking...
  10. WoodWrangler

    Thx for the SD508 recommendation!

    Thanks for everyone out here who so constantly pushed the Freud SD508 dado set on me ... :lol: Today I put it to use ... and WOW ... a beautiful cut! Worth every penny!
  11. wapitiscat

    dovetail bit recommendation wanted

    It's time I admit it ... I don't own a dovetail bit. There, I feel much better now that my dark secret is out. I want to cut some sockets (ways?) in a carcass for receiving drawer dividers but have no idea what bit would work for this. I'll be using 3/4" - 7/8" stock for the dividers. So what's...
  12. C

    Bandsaw blade recommendation

    I've ordered the Rikon 18" bandsaw and expect January delivery. I noticed Suffolk Machinery has a buy 3, get 1 free sale right now on the Timberwolf blades. I'd like to take advantage but am not sure what size to get. I know the saw will take 1/4 to 1 1/4 inch blades, 142 inch length...
  13. SteveColes

    Lathe recommendation

    Sometime after the first of the year, I am going to buy a lathe. I want to be aqble to do the gamut of things. Spindles in the 36" -42" range. Bowls and even pens. Recommendations please. I don't know yet how much I want to spend except I know I won't spen $5000 on a oneway, but I might go to...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top