pine

  1. ScottM

    Oak and Pine in Petersburg, VA

    Not mine....no connection. Just passing along info to our VA family: http://richmond.craigslist.org/mat/2256386921.html
  2. B

    Free wood (Heart Pine) for taking, problem is...

    :swoon:We have a house that needs to be demolished. We can not afford to do it. We were wondering if anyone would be willing to demolish the house for the lumber and bricks and copper wiring and it also has large members of oak. Is there anyone out there that would want this? It does have a lot...
  3. redhawknc1

    Need help with my Pine Flooring....

    Wife has me doing some remodeling in the house this winter as always. Currently remodeling our Master Bedroom. The painting, tearing out an old make-up vanity, etc. are finished. My problem is with the flooring. The flooring is 11" wide heart pine 14' long. Being a soft wood, the floors have...
  4. IMG_02713

    IMG_02713

  5. L

    Filling knot holes in knotty pine

    Does anyone have any suggestions as to what to use to fill holes in knotty pine? I can pick around and sellect areas of the boards that don't have the holes but thought if I could find something that would fill the holes and look nice I would do that. Waste not want not you know? I am looking...
  6. Scrollsawn Nativity

    Scrollsawn Nativity

    scrollsawn nativity
  7. Larry Rose

    Re-reclaimed Pine Table

    We had a rectangular table in our kitchen that I built 12 yrs ago from some reclaimed pine. SWMBO decided after all this time that it was too big and wanted a round one. Sandy was home last weekend and helped me drag the table to the shop. I tore it apart and built this one. After taking the old...
  8. H

    Heartwood Pine table - process, trestle base (continued) and saddle joint

    So here's the last in a series of posts on how I made this trestle table. 3 previous threads were: 1. General: http://www.ncwoodworker.net/forums/showthread.php?t=37044 2. Table top process: http://www.ncwoodworker.net/forums/showthread.php?t=37048 3. Trestle Base process...
  9. H

    Heartwood Pine table - trestle base design and fabrication

    In starting this project I had posed a few questions, both here and on WoodCentral. One question I asked was what type of wood I should use http://www.ncwoodworker.net/forums/showthread.php?t=35638 Another was the base design – specifically how the top of the trestle posts should be...
  10. H

    Heartwood pine table - process - table top

    This is the first of a few threads that I am planning that detail my fabrication of this table initially described in this thread (started earlier today) http://www.ncwoodworker.net/forums/showthread.php?p=353122#poststop Here is the finished product in it's final destination: I purchased S4S...
  11. Table - final destination

    Table - final destination

  12. Table - final destination

    Table - final destination

  13. H

    Heartwood pine table - completed

    Here is the biggest project I have ever worked on - well at least the heaviest. This is an almost 10' long (116") kitchen table that is 40" wide and has a 2" thick table top. I have documented the process details and will describe that in subsequent posts. and the piece at its destination...
  14. Table at destination

    Table at destination

  15. Table at destination

    Table at destination

  16. Table at destination

    Table at destination

  17. completed

    completed

  18. completed

    completed

  19. bases and top - stained and ready

    bases and top - stained and ready

  20. base assembled

    base assembled

Premier Sponsor

Our Sponsors

Top