owners

  1. H

    CT 26, 36,48 owners

    I don't know if this has been posted before. The new units being produced are HEPA CERTIFIED. The older units are not. Festool is now offering a free update to make them compliant (filter and some HEPA stickers) . Just ordered mine today. Good luck...
  2. Joe Scharle

    General M&T jig owners?

    Has anyone used/tested this jig?
  3. W

    To all HF lathe Owners in the Charlotte Area

    My MIL's husband lives in Charlotte and has a HF lathe. He took it apart to repair it ,something broke , and he cannot remember how to reassemble it.He has the parts to finish it and I was wondering if there was anybody in the Charlotte area that has the lathe and could lend a helping hand. If...
  4. W

    radial drill press owners?

    Does anybody in the Mooresville area, Lake Norman, Kannapolis ,Statesville have a radial drill press that could be setup to drill 1.5" holes in the end of 4 by 4 by 8' cypress post's. It is end grain :nah:and I'm trying to drill by hand drill and it is slow going to put it nicely. I've got 4 of...
  5. H

    Any 2HP cyclone owners out there?

    I am looking into the cyclone world after doing some work in the garage and found it harder to breath and ultimately got sick from the dust. I want to make an upgrade but I want to do it right. We have many folks with 3HP or greater and they all seem very pleased. My question is do you feel...
  6. S

    ShopSmith Owners: Anyone have the speed reducer?

    I was wondering if any ShopSmith owners here have the speed reducer? I attempted to turn a huge piece of wood a couple months ago, and it was definitely too out of balance for the lowest speed. It's a bit pricey for me with my current level of interest in turning, but wanted to get some...
  7. MrAudio815

    PM2000 owners, I have a Electrical question?

    Hey Everyone, It's been a while. Anyway I have been getting electrical out to my garage from inside the townhome. I put 50 amps out there with a 50 amp double pole circuit breaker and 6-3 gauge wire which can handle 55amps. Anyway my question is I have 12 gauge wire that I used to run my...
  8. richlife

    For Owners or Potential Owners of Fine Woodworking Archives DVD

    When I got my copy of FWW Archives 2009, I found a minor but significant problem and the very minor permanent fix for it. After installation, clicking on the FWW icon opened the software but it took fully 90 seconds to start up. I found that there is an extraneous false path shown in...
  9. W

    Question for 8" jointer owners

    Several years back I purchased an old surplus Porter 8" jointer from the company my wife worked for. They wanted to keep the motor which made no difference to me seeing as how it was 3 phase. Hopefully I'll finally get around to refurbishing this thing this winter. Question for you owners is...
  10. ScottM

    For all you RBI/Hawk owners

    looks like some good news here...... http://www.rbiwoodtools.com/
  11. PChristy

    HF Lathe owners

    What maintenance should I be doing on the HF - I know I should clean and blow out the saw dust - Is there and oil grease fittings- something else I should be watching out for
  12. gazzer

    Need info from Delta 50-850 Dust Collector Owners

    I have the opportunity to pick up a Delta canister filter (50-750) for a good price and am wondering whether it would fit on my Grizzly G1029 without much trouble. I would very much appreciate it if any Delta 50-850 dust collector owner would measure the diameter of the flange that the filter...
  13. NCTurner

    HF 34706 Owners Pros & Cons

    Ok HF 34706 owners let hear what you like and don't like about this lathe inquiring minds want to know.
  14. J

    Delta 22-580 owners

    I pulled this from a thread over at Woodnet (Delta 22-580 Soon To Be Obsolete). Sears 13" planer blades fit the 22-580. Sears item # 29 459. Maybe someone here can do a "link" to original Amazon review. According to thread, Sears blades cost about 1/3 of Delta's. No personal experience, as I now...
  15. Truefire

    ATTN: Jet mini lathe variable speed owners

    I own a model 1014 variable speed Jet mini lathe. i placed a double pole, double throw switch in the control box and it worked fine. I had both forward and reverse directional flow of the motor until I actually accidentally hit the double pole switch while in forward motion. Now all i have...
  16. W

    Fellow Rikon BS owners ?

    Now I know that a bunch of us bought Rikon BS recently so I'm looking for the people that bought the 14" deluxe.If you don't mind comparing notes please PM me and I would like to call you to discuss a few items /problems that I ran into at assembly.I want to know if they are things that I need...
  17. Bigdog72

    Delta Tenoning Jig Owners?

    I purchased a Delta tenoning jig (34-183) for my left tilt Unisaw. I feel that after following the directions to set up for a left tilt that I have the thing backwards. At least the clamp assembly and back plate seem that way. Am I missing something in the directions?
  18. Ken Massingale

    Attn: Worksharp Sharpener Owners

    The 1 each Micro-Mesh 3600 and 6000 discs that are in the optional Honing Kit for $14.99, are available from the manuf. for $1.89 each. The kicker is that they have a flat shipping fee of $10, so one would have to order several, or a few guys purchase together to be worthwhile. The type needed...
  19. rhett

    Grizzly owners speak up

    Anyone have the G0454 20" planer from Grizzly. Can't seem to find any reviews of this tool. I am wondering what the differences is between it and the G1033X, besides the indexable spiral cutter. I can order the G0454 and the same spiral cutter head and have it delivered for $200 less than...
  20. PeteM

    ??? for ex-Ryobi BT3000/3100 owners

    In another thread a few members said they upgraded to XXX tablesaws from the BT3K series and are glad they did. I currently have a BT3100 and am quite happy with it - but I have no experience using the "better" saws. My question is exactly what can you do with the higher dollar saws that you...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top