oak

  1. C

    Whiskey Barrel Staves

    Found these online and am going to use them for a feature wall! https://www.etsy.com/listing/769092068/whiskey-barrel-stave-bourbon-barrel-wood?ref=shop_home_active_4&crt=1
  2. Walnut, Locust, Poplar, Oak and Hickory Slabs

    Walnut, Locust, Poplar, Oak and Hickory Slabs

  3. Walnut, Locust, Poplar, Oak and Hickory Slabs

    Walnut, Locust, Poplar, Oak and Hickory Slabs

  4. Walnut, Locust, Poplar, Oak and Hickory Slabs

    Walnut, Locust, Poplar, Oak and Hickory Slabs

  5. Walnut, Locust, Poplar, Oak and Hickory Slabs

    Walnut, Locust, Poplar, Oak and Hickory Slabs

  6. Walnut, Locust, Poplar, Oak and Hickory Slabs

    Walnut, Locust, Poplar, Oak and Hickory Slabs

  7. Future red oak island surface

    Future red oak island surface

    this is the lumber I have to make a red oak kitchen island 3’ x 6’ x 1-1/2”. Thinking of cutting to smaller width between 3” and 4-1/4” to make up the width of the surface.
  8. Z

    Water damage repair to 3/4" T&G Red Oak flooring

    I am asking this in wood, because this fits better into the properties of the cellular structure of wood, and is not about finishing. Several years ago a 4" diameter of oak T&G flooring got wet and remained wet for several days. The manifestations are enlarged gaps between the boards, and...
  9. R

    Quarter Sawn white Oak Lumber

    I have approximately 300 bd feet of QSWO from one log. This wood is absolutely phenomenal. I skip planed one piece and am showing the picture here. It has been kiln dried to 9% mc and is ready for sale. I am offering it for sale for the woodworkers in this forum for $2000 for the whole lot...
  10. N

    Birch for Adirondack furniture? plus some walnut, spalted maple/oak, ironwood...

    Hi, let's start by saying I know nothing about woodworking but sure do love looking at what you all create! I have an acre lot here in Raleigh (Swift Creek area) and a NCSU/USFS forester has been helping me taking down leaners and thin the woods. So I have a lot of "sticks", some logs (most...
  11. N

    Trees/Wood for woodworkers

    Hi, brand new to this site, more of a woodworker groupie : ). I hope I'm posting this in the right place? I have an acre right outside Raleigh and have some trees/wood that I thought someone might like. One is a diseased/spalted? maple that needs to come down, although no rush on it. It's not...
  12. IMG_1002

    IMG_1002

    Completed table before delivery. 108" x 36".
  13. IMG_0999

    IMG_0999

    Top in finish room. Walnut stain, followed by 3 coats of satin lacquer.
  14. IMG_0996

    IMG_0996

    Squaring ends of top w/ router and guide. Made 4 passes.
  15. IMG_09941

    IMG_09941

    Squaring ends of top w/ router and guide. Made 4 passes.
  16. IMG_09892

    IMG_09892

    Table top glue up, using cauls to help keep it flat.
  17. IMG_09821

    IMG_09821

    Table top glue up, using cauls to help keep it flat.
  18. IMG_09763

    IMG_09763

    Joining boards to form top. Biscuits every 8", 13 per joint.
  19. IMG_09623

    IMG_09623

    Laying out boards for top. Arranging for "best face".
  20. IMG_09603

    IMG_09603

    Frame cross bracing attached to long rails. Pocket screws and glue blocks.

Our Sponsors

LATEST FOR SALE LISTINGS

Top