Here is a closer look at one of the cutting blocks I recently finished. Cherry,Walnut and Hard Maple make for a beautiful End Grain block. Ialso routed a nice deep juice groove in this block.
Here are a few end grain Cherry,Hard Maple and Walnut cutting boards I completed recently. I routed juice grooves in both as well as a handle for one of them. They measure 12"x18"x1.25"
QSS & Walnut coffee table and end tables designed and built by John Skipper. The different types of joinery include tongue and groove, through tenons - double and singles, notches and square pegs. The tops of the tables and the legs are curved. Through tenons attach the legs to the...
QSS & Walnut coffee table and end tables designed and built by John Skipper. The different types of joinery include tongue and groove, through tenons - double and singles, notches and square pegs. The tops of the tables and the legs are curved. Through tenons attach the legs to the...
I've looked this up online and have seen lots of back and forth about this, but thought I would open it up here.
In the past, whenever I've done an end grain to end grain joint (on a round form as in turning), I use dowels to help secure it, but reading some turners stories they do end grain...
Some how this has escaped all of us. You can longer even buy vb 3.x. There will NOT be any further bug fix releases or support of the vBulletin 3.X series. In other words, it is at a stage commonly called "End of Life".
We are at 3.8.6 PL1. the final release was 3.8.7 with a patch level of 2...
Last weekend my son Sandy came for a visit and some shop time. He wanted to make some cutting boards for gifts. His designs were a checker board like pattern that were made be gluing strips long grain and then cutting and regluing end grain. We used TightBond III for water resistance. I've since...
I purchased a piece of Quilted maple from Raleigh Woodcraft for about $65- it was 12"x20"x2.25". I made one jewelry box and also just finished this end table.
I think the book match came out great[/url][/IMG]
I was trying to use my band saw to resaw thin slices <thinking this would provide...