doors

  1. Replacing the doors on some of my workshop doors with oak-framed pegboard d

    Replacing the doors on some of my workshop doors with oak-framed pegboard d

    Starting to hang some tools
  2. Replacing the doors on some of my workshop doors with oak-framed pegboard d

    Replacing the doors on some of my workshop doors with oak-framed pegboard d

    Before (original doors)
  3. Replacing the doors on some of my workshop doors with oak-framed pegboard d

    Replacing the doors on some of my workshop doors with oak-framed pegboard d

    After (new oak & pegboard doors)
  4. DSC07167

    DSC07167

    workshop progress Jul
  5. Berta

    I made a Screen Door

    It took a long time. I had problems, put it aside and tried again and again. I learned this lesson; it ain't square until the square you are using is square! It is done, it works, and of course I had to add my own special thing. :) http://www.ncwoodworker.net/forums/#
  6. J

    router profiles for cabinet doors

    I have been searching the net for a chart that shows the profiles for cabinet doors.I need to print it to show a customer. Any sites ideas? Thanks Dwight
  7. CatButler

    Solid core doors available at the Scrap Exchange in Durham for $25

    If you go get one, pick up one for me too.
  8. W

    Insulating fiberglass garage shop doors

    I need to do the above and am wondering what the best way to do it is. Should I just use the regular batten insulation and tape it on or is there another method that is better? Appreciate any help. Thnx.
  9. P

    Doors and Windows Sale in Durham 8/20/2011

    Open House Sale: Interior/Exterior Doors and Windows 5401 Friends School Road, Durham, NC 27705 on Saturday, August 20th from 8:00 A.M. -- 2:00 P.M. Collection includes: • Interior Shoji door with Maple backside and solid Cherry front side. 3-0x6-8. $200 • Two interior beveled glass Fir...
  10. NCGrimbo

    Designing/building hidden doors.

    I'm going to begin finishing my attic into liveable space this year and one feature I've always wanted was a storage area with a hidden door. Something similare to these: http://hiddendoors.com/galleryThumb.asp?category=13 or http://hideadoor.com/. Has anyone done something like this? Can I...
  11. jobelenus

    curved (bowed)cabinet doors

    I was planning on building a small china cabinet for the wifey and she really has her heart set on something she calls "demilune" basically a bow front... The drawers and face frame I can handle, but this cabinet will have two doors opening below the drawers. How do I create bowed, veneered...
  12. Cody

    P.O. Box Doors Again

    I talked to a guy today that has some p.o. box doors for sale. Some are the grecian style that were available on here before. 3 5/8" by 5" and some 5 1/2" by 6 1/4" and a few 6 1/2 by 11". He also has some flying eagle in the same sizes, just not as many. He wants me to buy the whole lot, has...
  13. DaveO

    Post office box doors

    We have a new out of area registrant who is offering post office box doors for sale. He said he worked for the postal service in FL and got them at an auction for a really good price. He said he had ~1000 available and will sell them cheap. If anyone is interested in these doors or finding out...
  14. B

    Mitered Panel Doors

    Looking to make some flat panel mitered doors for some cabinets, but am wondering how to strengthen the miters. My kitchen cabinets have mitered flat panel doors. When I look at the inside of them, there appears to be a corrogated(?) fastener driven into each corner (slipped between the panel...
  15. L

    GSO CL: 1-3/4" solid oak doors $10@ - worktops?

    Not mine, yadda yadda; Greensboro seller dropped price, overall a REALLY cheap way to throw together some worktable tops, benchtops, etc. Apparently 50-60 to sell including hardware... http://greensboro.craigslist.org/mat/1898387160.html
  16. R

    Divided Lite Doors

    Does anyone have illustrations on how to make divided lite doors that are strong? I am looking at the amana divided lite router bit set, is this a good one?
  17. J

    Wtb, wooden, raised, panel, doors,

    I need a number of raised panel doors wooden.is there a local supplier with a fairly quick turn around Thanks Dwight
  18. T

    How does one make lites / mullion for glass cabinet doors?

    I am making a full pane glass door for a kitchen cabinet. I would like to give it a french style look with 6 lites and i need to know how to make the mullion. can anyone refer me to a site or give some insight into how this is done????
  19. C

    Options for concealed hinges on 3/8" inset cabinet doors.

    Hello all, I stumbled on this site while searching for replacement hinges for my old 3/8" inset cabinet doors, it's good to see someplace like this dedicated to the local community! Regardless, I'm trying to update the hinges on my old 3/8" inset kitchen cabinets and I really wanted to use...
  20. S

    Free Doors! -Habitat for Humanity -Raleigh

    Great for temp workbench tops, TS outfeed etc...Located in Raleigh at front entrance, cant miss Please google for address/phone. Your half of the work!:gar-Bi

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top