crib

  1. B

    Crib progress

    I posted a pic or two of some rough Cherry I had picked up and asked if you guys saw a crib in there some where. Well yesterday I got to the point of putting it together and thought I would share a couple pics of the progress. I still have to build or buy a platform for the mattress, haven't...
  2. gordonmt

    Crib springs needed

    I'm building my grandaughters first crib and i can't seem to find the springs that go under the mattress. Rockler sells a set but i only want the springs. Anyone have a source for this item?
  3. B

    Can you see a crib in here somewhere?

    My crib project is under way.... I picked up a 100 bfd of rough Cherry from Internet lumber on monday and just as I got it home it started raining so all I had time to do is stack it against the wall to get it in the dry. Today I cut off a 3' foot end of one of the rougher boards to see...
  4. stained oak cribe

    stained oak cribe

    Made for my grandson.
  5. mkepke

    Completed project..Jack's Crib

    A spot for baby Jack. This project took way too much time, from the I-think-I'll-try-inlay-for-the-first time to a way overcomplicated finishing schedule. Cherry with holly and ziricote inlays. All the material is/was shop cut from rough stock. Finished with selective staining, tung oil...
  6. Jack's Crib - detail of upper front leg

    Jack's Crib - detail of upper front leg

  7. Jack's Crib - detail of lower front leg and side rail

    Jack's Crib - detail of lower front leg and side rail

  8. Jack's Crib

    Jack's Crib

    Child's crib made out of cherry with holly and ziricote inlay.
  9. patch

    patch

  10. sediener

    Baby Crib...

    Got the 3/4 parts glued up today, would have finished but ran out of clamps... I just need to make and install the pyramids for the square mortices you can see on the second pic and attach the caps and then get to finishing. One side and both gates glued up. Waiting for some more clamps...
  11. ptt49er

    Project Joel, a Crib for the new baby...WIP Pics

    My Crib progress so far... Jumbled mess, I figured since the freezer wasn't storing food it would work as a parts table. It has served in that roll flawlessly. As Mike put it, this is my clamp farm. If only I could get them to reproduce on their own. This is a rail for one of the gates...
  12. michaelgarner

    anyone up to a crib?

    Hey friends, Pete and I are up to our ears in a couple cabinet jobs, My wife and I are five months out and are looking to get a crib, changing table, and dresser. The prices for the stuff they are selling is crazy, if anyone has time on their hands and would like to make some money I would...
  13. ptt49er

    Crib Construction

    Probing into the great minds that, when combined, form NCWWer... I'm building the crib pictured below, what's the best way to attack the slats to the rails? The plans call for a 3/8" thick by 3/4" deep dado with small spacers in between each slat. Have any of you guys tried this method? Was...
  14. Crib-1

    Crib-1

    Building the baby's crib. Made of Cherry.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top