chuck

  1. Homemade Vacuum Chuck

    Homemade Vacuum Chuck

  2. T

    4 Jaw Chuck Suggestions?

    Looking for opinions about 4 jaw chucks. I bought a Jet mini-lathe about a month ago and am in the market for a chuck. I have a 50 dollar gift certificate for Woodcraft and was considering the Woodriver chuck that sells for $86.50. I decided to look at what was offered by PSI and found a...
  3. stepped jaw chuck

    stepped jaw chuck

    stepped jaw chuck
  4. llucas

    Morse taper Jacobs chuck slips in tailstock

    Ok, so everyday I learn something new...usually by watching something go slightly wrong. This time it is the Morse taper Jacobs chuck slipping in the tailstock when I use it to drill out the center of a hollow form prior to turning the inside. The slipping is where the taper fits inside the...
  5. keyless chuck for sale

    keyless chuck for sale

  6. D

    Chuck help

    Rikon 1216 1/2HP VS Mini Lathe I'm thinking about purchasing this lathe. Any recommendations for a matching chuck? This will be my first lathe purchase.
  7. Flute Maker

    How About This Chuck?

    This chuck is in my budget and I am wondering does anyone have any experience with it? Use it turning bowls? Using friendly ? Pros/cons or other suggestions !!! Thanks !!! http://www.youtube.com/watch?v=k-ThFd03uvE
  8. ashley_phil

    Chuck Advice Needed

    Woodcraft has the Nova G3 in a good package deal right now: http://www.woodcraft.com/Product/2080766/29195/Nova-G3-Chuck-and-Jaw-Promotional-Package.aspx Chuck, Mini Cole Jaws and a couple other goodies for $ 150. I have a Supernova 2 and want some Cole Jaws to finish the bottoms of bowls...
  9. PChristy

    Nova Midi Chuck

    100-0240Nova Midi Chuck 1"-8TPI $99.99$69.99 http://www.woodturnerscatalog.com/store/Chucks___Teknatool___Nova_Midi_Chuck___nova_midi?Args=
  10. eyekode

    My chuck is stuck!

    I have a Jet JWL-1236 (like the HF lathe but doesn't have a spindle lock in the headstock casting). My chuck is a Nova Midi chuck (T-handles). And now it is stuck on the lathe :(. I have applied way more leverage than I probably should at this point. I am using a punch in the headstock indexing...
  11. Flootsie

    need chuck and live center?

    Sorry if this is put in wrong thread, and long time no see: I was in this group before and then life got busy... I need a Jacobs chuck, screw on, 3/4" and 16 TPI, 5-20 mm capacity. I also need a live head, 1 MT, preferably the kind with teeth and a sprung point. I cannot seem to find them in...
  12. sawduster

    drill chuck for my lathe

    i have a couple of old drills ......one cordless, one electric . I need a drill chuck for the headstock of my lathe . before I start breaking casings apart, is this doable or not worth the trouble ? :dontknow: Remember , i am member-in-good-standing of Glennbear's cheapskate frugal club
  13. erasmussen

    making a special vacuum chuck

    I needed a way to turn flat thin pieces 5 or 6" in diameter Thought a new vacuum chuck was in order. I'll try to show how I did it as best as I can:icon_scra first the parts a nut with a washer welded to it 2 pieces of mdf one with a 1 1/4 hole the second one has a pocked turned to just fit...
  14. vacuum chuck

    vacuum chuck

    holding flat bottom bowl
  15. vacuum chuck

    vacuum chuck

    holding flat piece
  16. vacuum chuck

    vacuum chuck

    smoothing edge
  17. vacuum chuck

    vacuum chuck

    seating pipe
  18. vacuum chuck

    vacuum chuck

    turning pocket for pvc
  19. vacuum chuck

    vacuum chuck

    gluing
  20. vacuum chuck

    vacuum chuck

    seatting the nut and washer

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top