bar

  1. Photo of Bar

    Photo of Bar

  2. Double Pull Out Trash

    Double Pull Out Trash

  3. Another Front View

    Another Front View

  4. Overall Front view of bar

    Overall Front view of bar

  5. Dovetail Drawer w/ Blum Tandom Self Closing Drawer Guides

    Dovetail Drawer w/ Blum Tandom Self Closing Drawer Guides

  6. Bar Moulding

    Bar Moulding

  7. Ceiling Panels in Bar Area

    Ceiling Panels in Bar Area

  8. Backside of Bar

    Backside of Bar

    Bar has a small frig and also wine chiller on other end.
  9. Right Side of Bar

    Right Side of Bar

  10. Left Side of Back Wall

    Left Side of Back Wall

  11. Backwall Photo of Bar Area

    Backwall Photo of Bar Area

  12. cyclopentadiene

    Cherry Maloof Bar Stools Ammonia Fuming Process

    I just completed construction of two Maloof Bar Stools using the plans from Scott Morrison. These are made with Cherry and Ebony plugs. The first photo shows the two stools sanded to 400 grit and ready for finish. The background is a tent constructed from PVC, plastic and duct tape to seal the...
  13. Gofor

    Chainsaw Bar Oil

    I have been chainsaw milling a few logs lately and am running into a problem with the chains crudding up with resin/residue to the point they won't cut, and the sticky mess actually causes drag on the chain in the bar groove. The chains are still fairly sharp after cleaning, so the main loss of...
  14. C

    Need to dust off the thermometer bar

    Hello all, its time for the Fall Donation Drive. My second favorite time of the year, right after the Spring Drive! Okay, now you know where we're going... Can we get the "Donate" button/link and the Thermometer ready to go? I'll have a thread in the morning (9/1) under Fund Raisers. I put...
  15. N

    Home made deep hollowing bar

    Seeing ScottS post about his homemade Ci rougher finally motivated me to finish my Ellsworth style deep hollowing bar. The handle is 26"x ~2" with 12" of 1/2" square stock. There is 6" of square stock in the handle. The bottom of the handle is oval for a more comfortable grip. I'll try this...
  16. manfre

    CL - Super Sale - Bar Clamps (Louisburg)

    “Super Sale” - Bar Clamps (Louisburg) Date: 2011-03-10, 8:28AM EST Reply to: sale-bm5fq-2257424492@craigslist.org [Errors when replying to ads?] Get some of your woodworking friends together and come on over to get the best prices on bar clamps. It’s worth the drive. New Shop-Tek Bar...
  17. Mike Davis

    Kitchen bar height table FINISHED

    We decided to keep the bar top from the old house and add legs to it for a bar height table. I cut some locust posts from the farm and a special sassafras limb that the kids used to sit in when they were little. Then a couple maple saplings that had vines wrapped around as they grew to make...
  18. blbradford

    Bar Top slab

    Seems like months ago I went with my trailer to pay a visit to Kyle Edwards and picked up a load of inventory- one piece of which was a huge slab of curly black walnut: Also a bunch of Sapele that was not in too good of shape, but Kyle made me such a deal that it was nearly free. I put the...
  19. Mike Davis

    WANTED - bar top - reasonable

    Looking for a 26 x 60 formica or other bar top Will consider just about any. Willing to pay fair price.
  20. cskipper

    Top tool bar missing?

    My computer is being wacky, so I don't know if it's me, or if the bars across the top that started with "Home" have disappeared.

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top