Well, as always, if you wait around the opportunity will come your way. Picked up a 2yr old D4 this morning that looks like new. Guy said it was too complicated. I guess I will find out for myself. Will post some pics to qualify for an official gloat later on.
Let me give you a pre YOU SUCK! for your purchase. I would love to get my hands on one of those used, but I'm sure they're even a pretty penny then. Happy dovetailing!
Yea, you suck. It isn't a complicated jig at all. Especially for thru DTs. HB DTs could be a little harder, but I would personally use a different jig for that, like one that cuts boards at the same time. Let me know if you need any advice on it's use. I have a D1600, but the principle is the same, and I have had a little experience with and older D4.
Dave
Have to agree with Dave on the half blind dovetails. They have to be cut seperate so it takes twice the time than a regular one. If it doesn't have the cam clamps I would suggest upgrading it to them as the screw nobs are a PIA.
It does have cam locks, looks almost new. I have all the paperwork and video. Came with 3 bits, but the router bushings were missing. I am sure the guy has them and I will check with him tomorrow morning.