station

  1. blazeman45

    Mitre Saw Station Build (Updated Pics - 11/18)

    After much thought, I went to the shop this morning and got started building my new mitre saw station... I purchased a new Dewalt 12" SCMS a couple of months ago to replace my old 12" Dewalt. I got the carcasses and tops built today and got the table for the saw installed. - The saw table is...
  2. drw

    Cordless Tool Station: Project Completed

    In my continuing effort to organize my little shop, I wanted to find a more satisfactory home for the cordless drills/drivers other than on top of the work bench. The project is an adaptation of a plan from Plans Now and is made from some odds and ends pieces of 3/4 cherry veneer that I had left...
  3. R

    First Post/Fence for Miter Saw Station

    Hi everybody, this is my first post so let me know if I'm doing anything wrong... Anyway, I recently started to build on my interest in woodworking so I've decided to set up my shop in the basement. I wanted to put a miter saw station on the longest wall and have the saw on top of a recessed...
  4. S

    Miter saw station help

    I am redoing m miter saw station to move it and make more usable space underneath. I plan on putting my jointer under it. If I remove the fence it stands at 33" with the mobile base. With the fence and upper handle I would have a really tall station. Anyone see any issues with just removing the...
  5. Canuck

    Chopsaw Station Done

    About 10 days ago, I decided that in spite of my limited shop real estate, I really needed a better/safer stand for my miter saw. It ended up 72" long, about 37" tall and 26" deep. I used 3/4" birch plywood for most of the carcass except the top infeed/outfeed tables and the saw support that...
  6. cyclopentadiene

    Completed Miter Saw Station

    Thanks to photos and posts from NC woodworker members, I was able to design a miter saw station. Attached are photos of the finished product. The base is a piece of 3/4 plywood on the workbench. A few weeks ago at IKEA in charlotte, I ran across 24" x 36" x 3/4" birch panels for $1.99 each...
  7. Leviblue

    Router Table/ Station - Shop Built Project

    After digging through the stuff in the garage, my quest to setup a small wood shop is starting to take shape. :wsmile: I thought I would share one of my projects with this group. I discovered my router/ shaper station that I built about 15 years ago. It may look familiar as it was built from...
  8. dlrion

    Weather Station

    Made a weather station, it has a Thermometer, Hygrometer, and a Barometer. Walnut and Poplar, finished with Laquer View image in gallery
  9. cyclopentadiene

    Miter saw station plans or photos

    I want to improve my sliding compound miter saw by constructing a miter saw station. I am interested in plans and or photos that others at the site have constructed.
  10. N

    New Sharpening Station

    Firstly, all the cabinet grade workshop guys avert your eyes. I wanted to try something a little different for my sharpening station. As I'm extremely space limited, I wanted something the could mount on my ways or screw down to my workbench. This is what I came up with. It's made entirely out...
  11. NCTurner

    Need sharpening station ideas.

    A recent CL acquisition has led this gem to my shop. I envision a new sharpening station and tool rack. Looking for some input and ideas, so what would you do? I have a bench grinder with wolverine setup, a WS3000, buffing wheel, 1x42 sander, and might want to add glass plates. Note not all...
  12. zapdafish

    miter station almost done

    I decided to build a flat station all the way across rather than sink a portion of it for the miter saw to live in. That way I could move it out of the way and use the counter space for other things. It also lets me move the miter saw to the left or right, depending on where I need the support...
  13. zapdafish

    miter saw station question

    My problem is that I need to buld some cabs along one wall in my garage for badly needed storage now and I don't have the budget for a miter saw. I found the image below online as something I will base mine off of but I don't have nearly the amount of wall space available. I have about 7 feet to...
  14. D

    Table saw station

    View image in gallery View image in gallery View image in gallery View image in gallery View image in gallery I have been working on this table saw station for the past few weeks and have just about finished it. View image in gallery
  15. merrill77

    My boring sharpening station

    Pun not intended - it is a combination drilling / mortising / sharpening station. Seem like a strange combination? Read on... Firstly, I've needed to get my drill press and mortiser mounted somewhere for a while. Shuffling them around on various benchtops was getting tiresome (I have a small...
  16. davejones

    MS Station w/ Snap-On Drawers

    Almost complete after getting sidetracked on several other projects. These are the Snap-On drawers from MrAudio815 (Matthew). I still need to finish up the DC setup, build a door for the center cabinet, and apply finish. I think I am going to try WB poly on this. The drawers and...
  17. W

    Need Some Mitre Station Ideas

    Well,I had a long weekend so I took apart a 12' long radial arm bench and opened up some serious room.Now I would like to come up with a Mitre box station with storage below it.I'm wanting to see some pix of what people have come up with for there own shops.I need some drawers and a long support...
  18. AmishWarlord

    Dremel Scroll Saw Station

    Hey Phillip, I saw you had a problem back in Feb with your 1800 saw not holding blades. Did you get that problem fixed? My new 1830 is doing good but I'd like to be ready if that problem creeps up on me. Mine doesn’t hold some spiral blades that I bought but I think that is more of the blades...
  19. Touchwood

    Sharpening station

    Hi All, There's been a lot of stuff lately about tool sharpening equipment and thought I'd share with you the approach I came up with circa 1993. There were very few inexpensive systems around then (in fact none), I was into turning and needed a better way (faster way) than hand honing. I...
  20. PChristy

    Someone was looking for a charging station

    http://www.woodmagazine.com/woodworking-plans/drilling/recharging-station/?sssdmh=dm17.385766&esrc=nwwood52_09&email=491035404

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

LATEST FOR SALE LISTINGS

Top