stand

  1. dino drosas

    Lathe Stand Totally Finished, A Gloat

    The lathe stand is finally finished. The hardware for the drop leaf finally arrived and I got it installed. The folding brackets are very strong and support the bed extension with no flex at all. I also fitted the drawers for the tools and all the lathe accessories. Now everything that goes with...
  2. steviegwood

    Small Phone Stand

    Hi Y'all, here is a small stand that I made for my Mom. It is 12"x12"x16&5/8"t. She wanted a small stand to set her phone on beside her chair in the living room. It is made with all 5/8" solid maple and it will hold me setting on it and at around 230lbs I think it might hold her phone. Steve
  3. dino drosas

    Lathe Stand Complete- Almost

    I finally got the lathe stand finished today. Got it just the right height so I do not have to stand on a box any more. The drop leaf section on the right side is to accommodate the lathe bed extension which will give me up to 48 inches between centers for turning. I have a pair of folding shelf...
  4. dino drosas

    WIP, Lathe Stand for New Lathe

    I spent a few hours in the shop today gluing up the base for the lathe stand and the top while listening to The "Prairie Home Companion" on NPR. The stand is solid 1" Maple with Amazakoue panels. Right side of base will contain 5 drawers and the left will have a cabinet door.All went well for a...
  5. eyekode

    TV Stand

    Disclaimer: this is not fine woodworking. Only sheet goods but I like the design and thought I would share :). We wanted a TV stand that would fit in the corner and not obstruct the entryway of the room. The stand is ~45" wide, ~23" tall and less than 17" deep. It is made out of birch plywood...
  6. merrill77

    Ral CL: Jet jointer and Delta 22-580 planer with stand

    http://raleigh.craigslist.org/tls/1031102015.html http://raleigh.craigslist.org/tls/1031097686.html They are just a jog from me, if anyone remote is hot for it.
  7. Douglas Robinson

    RAL CL: 20" Scroll Saw with Stand - $85 (Raleigh)

    Transpower 20" scroll saw. This is a clone of the very expensive RBI-Hawk scroll saw that sells for around $900 new. Saw is in very good shape and performs well. I'm clearing out my garage for my wife. Call or email if interested. 919-851-8048. http://raleigh.craigslist.org/tls/986423014.html
  8. ptt49er

    Chest of Drawers/TV stand Design Critique

    I have a friend wanting a chest of drawers/TV stand for her bedroom. She dictated the outside dimensions and height and an overall idea of what she wanted. I've played around with the drawer depth because she wanted 14" deep drawers, I figured that would be a little deep for clothes. So I've...
  9. ErnieM

    Harpsichord Project Part 10 - The Stand

    Hi all, It’s time to build the harpsichord’s stand so I can get it off my assembly table. Since this is a rather small instrument, we’ll build a simple, 4 leg trestle stand for it. This type of stand can be taken apart quite easily and increases the portability of the instrument. Since...
  10. FredP

    new project. television stand

    this was made for a close friend. he got a new flat screen and needed a place to put it. it is mahogany with 1 coat sand and seal and 3 coats wipe on poly.
  11. farmerbw

    Dewalt DW788 and stand on CL

    http://raleigh.craigslist.org/tls/844115106.html Not mine and not sure if it's a good deal or not, but I emailed the guy last night cause he only casually mentioned the scroll saw in the posting and gave no price. It was still available this am and he was asking $325 for both, says it's...
  12. 4yanks

    Flip Top Stand

    I saw that Bas recently posted about the flip-top stand that he made for his shop so I thought I would throw mine in as well. I don't have a tool for the other side yet, but I am scheming:wink_smil.
  13. Bas

    Mobile multi-functional shop utility convertible fliptop miter saw/ sander stand

    One of the first tools I bought for my shop was a miter saw. This was before I had even gotten into woodworking, I just needed something to cut 2x4's and baseboard. It's actually not a bad saw, but it had two problems: 1. It took up a lot of space on my workbench :no: 2. It produced a lot of...
    • Bas
    • Thread
    • convertible fliptop miter mobile multifunctional sander saw or shop stand utility
    • Replies: 36
    • Forum: General Woodworking
  14. GarageWoodworks

    Cherry TV Stand

    Hey gang, I haven't posted in a while, but... I thought I'd show-off my latest project. It is a cherry TV stand I made for our LCD. It features bookmathed flat panels (first time making book matched panels). It was finished with 2 parts Minwax Tung Oil finish and 1 part pure tung oil. It was...
  15. welldigger

    TV Stand Finished....

  16. welldigger

    WIP TV Stand progress

    Got the mitered/beveled molding and base on yesterday. Didn't get much shop time today because I had to dry out my truck. (I left a window down yesterday evening and let 2.68" of rain...
  17. TracyP

    Double plant stand

    I went to see Jackleg last weekend and had a great time. This is what came of the trip. It is two plant stands like the ones in his gallery joined together. Finish is the remaining mixture of blo and poly left over from the previous project. Plant stands are a gift for my mother. The wood...
  18. johnpipe108

    BPCS Powder-tube stand

    Black-Powder Cartridge Shooting (BPCS) is a "roll your own" pastime, and one popular accessory is a "drop tube" used to settle the powder into the brass shell-case. I've jerry-rigged mine with a wood clamp to an inconvenient location many times, and finally realized a simple solution to making...
  19. welldigger

    WIP TV Stand

    Got a new 52" LCD TV a couple of weeks ago and had to build a stand for it. Installed face frame and side molding last weekend. Case is oak ply, side molding is "raised panel". Ran 3/8" oak for rail and stile on...
  20. MikeL

    Raised stand for lathe and lighting

    Today I decided to finally build a stand to increase the working height of my lathe. I used some salvaged plywood and 2x4's along with a pack of adjustable feet from Hartville Tool (they are nice :icon_thum). Since I never throw anything away, I took our old track lighting that was...
    • MikeL
    • Thread
    • lathe lighting raised stand
    • Replies: 10
    • Forum: Woodturning

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top