removal

  1. Mike Camp

    Electrolysis Rocks for Rust Removal!

    I've been cleaning/derusting/restoring a contractor table saw I got from junquecol's stash, and decided to give electrolysis a try. My setup involved two anodes which are 1/2" rebar zip tied to some old brake rotors I had lying around after I helped my neighbor change his brakes. The rotors have...
  2. Old Plane Part

    Old Plane Part

    • Bugle
    • Media item
    • removal rust
    • Comments: 0
    • Category: Member Galleries
  3. Old Plane Part

    Old Plane Part

    • Bugle
    • Media item
    • removal rust
    • Comments: 0
    • Category: Member Galleries
  4. CrealBilly

    Rust Removal - The best way?

    My father in law gave me a old antique draw knife and a large (3 wide x 18" long) wood rasp. Both need rust removal the draw knife more so than the rasp. What's the best way, rotten potato soup, water electrolysis or chemical? Thanks
  5. M

    Recommendation for Tile Removal Contractor near Monroe

    I am wanting to install a wood floor in my house entryway, but I would like to have someone remove the existing ceramic tile. It's on a concrete slab. Area is about 90 sq ft. Anyone know a good handyman or contractor? I really would like to hire a small a contractor or a good handyman, rather...
  6. D

    Tree Removal Recommendations

    I have did a search for Tree removal and was very helpful although 2009 was the latest post I am looking for other names as well in the Durham area. I am looking for to have some trees removed here near the home and shop....I know, I know, call a professional...that is what I am looking before...
  7. jimwill48

    Web Site Link Removal

    Hi, I just closed down my website and want to delete it from the Links Lib. How do I do it? The website was: www.williamswoodworks.net :tinysmile_cry_t: Thanks, James
  8. Charlie

    PM3520 Tailstock Removal

    When I want to turn a bowl at the end of the lathe, it is necessary to remove the tailstock assembly. Not only is the assembly heavy, but it requires space to store it after removal. There are several commercially built solutions, but not only are they expensive, none of them meet my criteria. I...
  9. Mr. Lahey

    My Experiment with Electrolysis (rust removal. dialup beware)

    Decided to try a process I read about in More Woodworkers Essentials. Here is a link that explains the process better than I can. http://www.rowand.net/Shop/Tools/Electrolysis.htm Here is the part before After about 5 minutes in the solution. It's already bubbling and turning green...
    • Mr. Lahey
    • Thread
    • beware dialup electrolysis experiment removal rust
    • Replies: 9
    • Forum: "How To" Forum
  10. gordonmt

    Laquer finish removal

    I have an electric guitar body that I believe is catylized laquer. Any one know what solvent will remove this stuff. So far it has been resistant to Zip strip, alcohols, and mineral spirits. Any ideas out there on how to remove this finish so the body can be refinished?
  11. H

    Headstock pulley removal - Nova 3000

    I have a Nova 3000 lathe and have already appreciated your assistance in remounting the pulley set on the motor. Now I find that i want to pull the headstock pulley set. Here's why. When I remove the drive belt and spin the headstock by hand there is a definite point at which th ere is a...
    • Henry W
    • Thread
    • 3000 headstock nova pulley removal
    • Replies: 6
    • Forum: Woodturning
  12. Joe Scharle

    Tree removal recommendations

    in the Holly Springs (Raleigh) area? Need a big pine taken down near the house. I'm asking here before I let my fingers do the walking!
  13. D

    Large Tree Removal... went to the tub grinder

    We had a large tree removed. We live in the City of Charlotte and paid a fortue to have this tree removed. There is no market in Charlotte for 7.5 ton 6 foot sections of Willow Oak. No one wants to deal with the weight and worry about what fence, nails, cloths line pulley, etc... have grown...
    • DonnellyJT
    • Thread
    • grinder large removal tree tub
    • Replies: 10
    • Forum: Wood
  14. J

    paint removal

    My house was built in 1940. the front door and surround has paint on it 1/4" thick. have tried gel stripper, hand scraper, dremel multi-max, randow orbit sander. is there an easy way?
  15. 02blues

    day one potato bath for Rust removal...

    OK Guys. Thanks to your advice I am going to try the potato bath experiment. Spud preperations were made today and the brew placed outside..(thanks Jim). Photos to follow in 2 weeks! This spuds for you!:gar-Bi
  16. JRD

    Brass Screw Removal

    I'm looking for ideas, tips, hints, etc. on removing broken brass screws from a wooden box that I'm making. One, has broken off just above the wood surface, two are flush with the surface of the wood. My first thought, other than a few choice words, was just drill them out, but I want to...
  17. W

    Removal of Finishing from Cherry Boards- Help

    I have a few cherry boards which have been finished. I want to remove the finish. What is the best way of doing it? I tried drum sanding. It didn't work. The finish filled the sand paper quickly causing burn to cherry. I don't want to use planer either. It will plane the boards too thin:gar-Cr...
  18. Ralrick

    Tree Removal Experts

    Any tree removal specialists? We have a dead tree (I think it is oak) on a pretty steep hill. I'd like to get this removed before it falls on its own. I'm going to get quotes for the removal but I'd be interested to know what the best way for removal would be before getting the quotes. Does...
    • Ralrick
    • Thread
    • experts removal tree
    • Replies: 32
    • Forum: Wood
  19. b4man

    Deck stain removal

    I started pressure washing my deck today. I wonder if there's any type of stain/finish remover to speed it along? At the rate I'm going I may be doing this until labor day:eek: I have an opaque redwood stain on it and will probably re-stain the same color. I can't remember if it was water base...
  20. Don Sorensen

    Sanding Dust removal help?

    I don't mean to brag, but I got to spend a couple hours sanding this evening. One of my least favorite jobs. I can think of a number of ways to remove the remnant sawdust from the project, but I lack confidence in them (they came from my brain, after all). So I'm working on a number of gears...
    • Don Sorensen
    • Thread
    • clock dust dust removal gears removal sanding
    • Replies: 8
    • Forum: Finishing

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top