oops

I got the Shop Fox D2058A mobile base for my G0524X band saw. This is the mobile base reccomended for this saw by Grizzly. Tried to open the lower door yesterday and discovered this little oops. View image in gallery View image in gallery The bolts the secure the rails to the...

I am making a frame with a rabbet on the top side to accommodate a piece of plywood. Where this will go has an obstruction at one corner, so I decided to make one corner two 45's instead of a 90 degree. I cut the main four pieces and rabbetted them using my router table and then dry fitted them...

The last of the electrical gremlins were worked out of the shop generator today. Turns out that replacing the defective oil pressure and water temp senders solved the problem. However, I was still puzzled why that, even with multiple windows in the shop open, the entrance door was still yanked...

So I was working in the shop this past Sunday, and was cutting the corners off some walnut squares with my chop saw. Well, my second youngest came out to talk, and watch me work. That in itself was enough for me to make a mistake. I lifted the blade on the chopsaw while it was still winding...

Amber Shellac - White wall 'nuff said:swoon::embarrassed::wmad::wcry:

Sometimes I get one of those ideas that just bugs the heck out of me until I try iy just to see what would happen. This is one of those cases. This blank required me to make 2 blanks identical but with the colors?woods reversed. Without going into detail the blanks required registration marks...

I was busily working away at my scroll saw a little bit ago and had just released the blade moved it and was pressing the tensioning knob back into place and poof - it broke off. I, of course, thought that it was a sign that I need a new saw. LOML thought it meant that he had to go to Lowes to...

Well not to bad. I must be not thinking straight because I have had shop time 4 of the last 5 days. I don't think I have ever had that before. The first picture shows the stiles cut a little short. I dropped an inch off my measurements from the tape measure to the paper:BangHead: . Oh well...

Them there commission threads remined me I said I would post progress pics. Here be the first batch. It will be constructed on cherry, with walnut plugs and accents, as well as figured bookmatched panels of cherry and lyptus. Five pieces--48Wx26Dx90H for the main case; the first two side...