hose

  1. T

    6" & 4" spiral pipe and fittings

    I am looking for approximately 60-80' of 6" spiral pipe and approximately 40' of 4" spiral pipe to help finish assembling my dust collection system. In addition, I will need 6x6x4" lateral y's. If you know of anyone that has some of these products would you please send them my way via email...
    • Temp626
    • Thread
    • collection collector cyclone duct ductwork dust fittings hose lateral pipe piping reducer separator shopvac spiral vacuum
    • Replies: 2
    • Forum: Where Can I Find, Buy or Sell?
  2. Luckbox72

    Looking for dust hose

    I ma working on my router table and getting close to the point to setting up the dust collection for it. The one thing I am looking for is about 1.5 foot section of 4" dust hose and maybe 3 - 5 feet of 2.5" hose. Does anyone know where I can find these shorter amounts? I can only find the...
  3. Bas

    Short piece of 7" flexible hose

    Does anyone have a short piece of 7" flexible dust collection hose they are willing to sell? I need 2 feet. The BlastGate company sells by the foot, but it's very expensive. McMaster also sells it by the foot, but only in 5' increments. Then I'd have to store the remainder for the next 30 years...
  4. W

    Storing my air hose

    Here is my solution for hanging my air hose. Just something I threw together last weekend with some scraps I had around the shop.
  5. S

    2 1/2in Flex Form Hose Kit _Rockler Sale

    http://www.rockler.com/product.cfm?page=22150&filter=Rockler%20Outlet I use this on my Drill Press, works great! Free ship if you spend $75 or more..... til 29th? I think M
  6. S

    Festool Hose Adaptors..to fit..PC Bosch etc

    As a Festool newbie...(Dust collector CT36 owner) I need to find a hose adaptor that fits my PC Biscuit Joiner, Bosch handplaner, etc... Pretty much any dust producing non-Festool, tool. I know I could research, but, with so many other things going on..... TIA Matt
  7. dlrion

    4 Inch vacuum hose???

    Where is the best place to get it? I am having a hard time finding it locally, I may have to run to the triangle. Dan
  8. zapdafish

    need a new air hose

    my compressor came with an expanding coiled one that has gotten looped into itself one too many times. I am so mad at it I want to throw the whole compressor out. If it bends around and touches itself, it gets tangled. Anything I should look for in a good hose? I like the pliable ones at tire...
  9. MrAudio815

    Where do you get 5" dust collection hose?

    Hey everyone, Just trying to find the best/cheapest place to get 5" dust collection hose? I have found 5" X 10 for $27.65 and that's including shipping: http://www.amazon.com/Woodstock-W1033-5-Inch-10-Foot-Hose/dp/B0000DD1I0/ref=sr_1_2?ie=UTF8&s=home-garden&qid=1279231471&sr=8-2 But...
  10. kooshball

    High-flow hose bibb?

    Is there such a thing as high-flow hose bibbs? I have two leaky ones that need replacing and while I am doing that I plan to increase the supply line from 1/2" to 3/4" but when I look inside these bibbs I see where there is still a very small area that the water passes through. Any plumbers...
  11. kooshball

    Dust collection hose and where to find it cheap?

    Just jumped on a 2hp HF dust collector for $179 - 20% discount (how could I NOT buy it?) and I now need some 4" id hose to hook it to my tools. I assume that some of the more expensive hoses have a smoother inside and are made of a heavier plastic but is there a good on-line or local...
  12. J

    Air Hose

    If you need some short lengths of air hose, check your local Northern Tool store. They stock short lengths (12' - 15') for about $5.99. The stock changes often, depending upon what D & O (they make them) runs, and has short lengths left over. Add some HF $3.99 (often on sale for ($1.99) couplers...
  13. Trent Mason

    Compressor hose coupler question

    I went out and got a 100' hose for the compressor so I could simply leave it in one place when doing remodeling work, rather than dragging it from room to room. I then purchased a few of the brass couplers from the BORG, came home, tightened them until I physically couldn't tighten them any...
  14. R

    4" Dust Collector Hose

    Where can I find the best value for 4" dust collector hose? Thanks.
  15. PChristy

    air hose

    I have one of those flex air hose's that you can move around and it will stay where you put it and it has come off of the connector on the machine - I have tried to put it back on with no luck - where I use to work we had the same thing and they had a tool that would snap it back onto the...
  16. J

    looking for 6" DC hose

    Hey all, I'm looking for 6" DC hose, I'd like it to be clear and smooth on the inside if possible. Where would you recommend for me to purchase it ? Thanks in advance,
  17. Matt Schnurbusch

    Hose Bib repair

    I have a customer that has Woodford model 17 hose bibs on her house. Both of them are leaking from the anti-siphon valve on the top. Anyone know how that little plastic cap comes off? I tried turning it, and pulling on it. Frankly I'm a little hesitant to use much force, I don't want to...
  18. Mike Davis

    Flex hose 4 inch?

    Where can I get some of that flexible vacuum hose like kinda cheap? I think I need about 8 feet or so, could be 4 inch or even 3 inch. Somebody has some 4 inch PVC pipe for me but it maybe a while before I can get it.
  19. E

    vac hose for power tools

    Thought I would post this for anyone interested, I was looking for a small lightweight vac hose that was easy to hook up to various power tools and the shopvac...well after some research I finally found it. It is the Bosch VAC001. It has a connection that plugs directly into the standard...
  20. Terry

    Light Clamp for Vac Hose

    I saw a thread this week on a new Drill Press table and it showed a Vacu Hose on it and someone made the comment that it would be nice to be able to move around. Just a thought Terry:eusa_thin

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top