fit

  1. Larry Rose

    Wip dry fit

    I've been working on this Hepplewhite style dressing table for a few weeks now and finally got to the dry fit stage. I saw one in an antique store last year and was able to get a couple of very poor pics and a few measurements before the store owner started giving me the evil eye. I quess I...
  2. bluchz

    Proper fit for dado's and rabbits?

    I am making some kitchen cabinet. The upper cabinet assemblies are making me crazy! I took the time to cut all the pieces. The cabinets are assembled with dados, rabbits, glue, and brads to hold it all together while the blue dries. I took the time to set up my dado cutter on the table saw and...
  3. Larry Rose

    Wip dry fit

    View image in gallery I've been working on this mahogany coffee table for SWMBO for much too long now. I've obviously got a lot of sanding and fitting left before the finishing room View image in gallery
  4. Mission tables, red oak, dry fit

    Mission tables, red oak, dry fit

    Mission tables, red oak, dry fit
    • bwat
    • Media item
    • dry fit mission oak red tables
    • Comments: 0
    • Category: Member Galleries
  5. P10101891

    P10101891

    Vacuum System Dry Fit
    • NCTurner
    • Media item
    • dry fit system vacuum
    • Comments: 0
    • Album: Tools
  6. P10101882

    P10101882

    Vacuum System Dry Fit
    • NCTurner
    • Media item
    • dry fit system vacuum
    • Comments: 0
    • Album: Tools
  7. P10101871

    P10101871

    Vacuum System Dry Fit
    • NCTurner
    • Media item
    • dry fit system vacuum
    • Comments: 0
    • Album: Tools
  8. Woodchuck

    Hope All These Parts Fit

    Here's Roscoe, a WIP. First time I've tried to carve separate parts and fit them together. As you can see, it allows you place the head in different positions. The bust will be mounted on a stand attached to a base. Now I have to decide what color outfit he has on. Will post when completed...
  9. J

    Main page don't fit

    Last few weeks I noticed the main page no longer fits in the browser. I'm afraid if I re-size it I won't be able to read anything cause the print will be too small. Actually you'll see several things are all whacked up in this picture... it's way over crowed, I'm starting to get confused...
    • jeff...
    • Thread
    • fit main page
    • Replies: 10
    • Forum: Help Desk
  10. CarvedTones

    Excelsior? It's not slippery; this just might fit better

    Yeah, right. :rolleyes: Anyway, I will be just a few minutes away from the Sandy Springs Rockler for Thanksgiving. Check out page 4 of their ad: http://www.rockler.com/Retail/flyer/Nov08b2/4.pdf Hmmm... When I consider that I really need a better motor on that old lathe (so I really need...
  11. Larry Rose

    Cypress Bench Dry Fit WIP

    This is the result of my last few days in the shop. Now I got to take it apart and start sanding. I will use a marine grade varnish to finish . It goes to the local Garden Club for thier fund raising auction. More when finished.
  12. MikeL

    Trash Can Lid Separator Fit???

    Hey gang, I ordered one of the trash can lid separators and it says it fits a standard 20" can. Well, after dragging it through the store and trying it on each variety at the BORG, I still couldn't find one that seemed to fit properly. Question: Is there supposed to be a snug fit or does...
  13. DavidF

    demilune fit for scrap - gutted

    Well the table was almost finished, sanded with micromesh till it gleamed. Ebony legs looking sensational, all that was left was to pour the resin into "Jordan lake" What B#$$d invented that #$$% polyester resin? I researched the web, I made test pours in scrap lakes, I read all the instructions...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top