euro

  1. PeteM

    Euro Beech and Cherry Headboard

    A headboard for our guest bedroom. This project has been on my honey-do list for a few years now. Finally got a round tuit. I told Mike (Shamrock) that I had finally finished it and was politely reminded of the "no picture - it didn't happen rule"! So here it is: pete
  2. Beech Headboard

    Beech Headboard

    Euro Beech Headboard with Cherry panels
    • PeteM
    • Media item
    • beech cherry euro headboard panels with
    • Comments: 0
    • Category: Member Galleries
  3. sawduster

    euro hinges

    Is there a standard size for the " cup hole " when drilling for a new euro hinge ? the set I have says 35MM bit but that don't mean nuttin to me :nah: TIA :icon_thum
  4. Bas

    Euro hinges / adjustability

    I built the frames for my doors today (all 8 of 'em), using a rail & stile bit. I cut the rails 3/4" wider than the required width to account for the tenon on the end (3/8" on each side). Unfortunately, I didn't measure the tenon properly. It's not 3/8", it's about 1/32" longer. Don't ask me...
  5. TracyP

    Spalted Cumala Euro

    This is the third project from this weekend in the shop. This is my first successful euro pen, And yes, the center band is on backwards:dontknow:. CA glue holding it on so it will have to stay that way. Kinda makes it unique. The Cumala is from Jackleg. Thanks Reggie. Finish is tung oil and...
  6. D

    HELP! Need old style Euro Hinges

    A lady hired me to remount a kitchen cabinet and rehang the doors that used to be on the cabinet. However all the hinge hardware got lost over the 2 years the cabinet doors got kicked around in their basement. I did remount the cabinet. Didn't know the hardware was missing till I got the cabinet...
  7. nelsone

    2nd euro

    I was planning on getting a couple done today, but LOML had other ideas and I ended up doing some yard work:-? Oh well, at least I had a chance to get one done! This is some more of the ambrosia maple, but I found a spot with some interesting grain. I put a little med brown dye on it to see what...
  8. nelsone

    My First Euro

    Took some time tonight for some personal satisfaction. What do you think?
  9. Eaglesc

    Walnut Euro with inlay

    I have been palying around with this for a while.It is a PK Mon PAr from Woodturningz.I like this kit a lot because it is easily modifiable.After buying over a hundred in the last year or so this is the first time I made one as it was designed. Walnut body, bloodwood inlay with a holly cross...
  10. J

    Raleigh area: cabinet door euro hinge difficulties

    Hi All, I have a cabinet door that has two sets of euro hinge indentations. Unfortunately, one set of holes match the location of a shelf. I need to drill/make/fashion a new set of holes. In the North Raleigh area, is someone versed in euro-hinge holes? Any advice/assistance is...
    • Jim OC
    • Thread
    • area cabinet difficulties door euro hinge raleigh
    • Replies: 11
    • Forum: General Woodworking
  11. sapwood

    Euro Summit Report

    The summit was held in Apex (duh, it was a summit) and although no resolutions were passed; the food and camarderie were excellent. :mrgreen: And for those who demand pixs--voila! Please note viewing may not be suitable for all ages :eusa_shhh Bernhard, David, Dave, and Steve David, Roger...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top