drilling
-
Klutch 3/8 Inch Angle Drill Attachment
While repurposing an old chest of drawers, the need for tight-quarters,right angle drilling arose. I wanted the ability to use other than hex-shankbits, which narrowed things down to ones with a chuck of some sort. I also wanted to keep the project moving, so local availability was a plus. A... -
Free hand drilling on lathe?
Sounds crazy to me except I saw a guy on youtube do it on by holding the drill bit with vice grips and hand feeding it into the end of a spindle. He said the rotation will keep the drill centered and he didn't have any problems. My question is, how do you feel about this? The reason I ask, I've...- Rick M
- Thread
- drilling lathe
- Replies: 9
- Forum: Woodturning
-
W
I need a Shelf Drilling Jig
Does anybody in the Mooresville area have a shelf drilling jig that I can borrow for a day or so.Got a job that needs to get done so I don't have the time to spend making one or ordering one.I will order one this coming week but need to get this done today.PM me if you can help. Need the 1/4"...- Woodman2k
- Thread
- drilling jig shelf
- Replies: 7
- Forum: Where Can I Find, Buy or Sell?
-
Oland_rod_cradle
- sushinutnc
- Media item
- cradle drilling rod
- Comments: 0
- Album: Øland Tools
-
BoringStation-sharpeningShelf2
My mobile boring/sharpening station with the sharpening shelf extended and the sharpening supplies drawer out (my first drawer ever!)- merrill77
- Media item
- drilling mobile mortising sharpening stand station
- Comments: 0
- Category: Member Galleries
-
BoringStation-sharpeningShelf1
My mobile boring/sharpening station with the sharpening shelf extended - ready to use the worksharp.- merrill77
- Media item
- drilling mobile mortising sharpening stand station
- Comments: 0
- Category: Member Galleries
-
BoringStation-mortiser
My mobile boring/sharpening station with the mortiser rotated forward for use.- merrill77
- Media item
- drilling mobile mortising sharpening stand station
- Comments: 0
- Category: Member Galleries
-
Boring station - Drill press ready
My mobile boring/sharpening station with the drill press rotated forward for use.- merrill77
- Media item
- drilling mobile mortising sharpening stand station
- Comments: 0
- Category: Member Galleries
-
R
Drilling Problems???HELP!!
Ok folks heres the problem.I've noticed that the pen tubes have alot of play in the blank:BangHead:.The bit I've got came from Psi. 7mm so whats up.I've got a pre-drilled blank that Tom sent with the lathe and the bit won't even fit into it.But the tubes fit great.Has anyone else had this...- Robert Arrowood
- Thread
- drilling problemshelp
- Replies: 1
- Forum: Woodturning
-
Advise please on drilling antlers for pen blanks
Fellow pen turners, I'll be attempting to use deer antlers for pen blanks soon. Do you have any advise for me? I understand that drilling them can be frustrating. What finish do you recommend? :icon_scra Also, Penn State Industries has a Sambar Deer blank. Have any of you used them? What...- DonEve
- Thread
- advise antlers blanks drilling pen
- Replies: 3
- Forum: Woodturning
-
Pen blank drilling tip!
Hi Guys/Gals, Some of you "newbies" may have the problem I've experienced. I have a pen blank vise I use to secure the blank while drilling. My vise has a metal bottom so using wood as a cushion against dulling the drill bit and splintering the pen blank is a must. Finding a piece of wood the...- DonEve
- Thread
- blank drilling pen tip
- Replies: 3
- Forum: Woodturning
-
N
Drilling long blanks
Does anyone have suggestions on how to drill a blank past the limits of your drill press or lathe? My machines can handle 2 1/2" but I need at least 3 1/2" for the blank (woodworker's pencil). Standing in my garage staring at my drill press and waiting for inspiration hasn't seemed to help...- nblong
- Thread
- blanks drilling long
- Replies: 15
- Forum: Woodturning
-
Drilling advice needed..
Guys/Gals, I've still not come to terms on how best, and most economically, to drill my pen blanks. What is your tool of choice? Is a quill travel on a drill press of 2 3/8" enough? Besides using a drill press for "drilling" (Ha!), what else could I use it for? Do any of you use the lathe...- DonEve
- Thread
- advice drilling needed
- Replies: 16
- Forum: Woodturning
-
Pen drilling jig
Now that I have been bitten by the dark side bug ( I can still see the light and it is good ) I would like to try my hand at a pen or two. Does any one coming to the picnic have a spare or unused pen drilling jig I can borrow for a couple weeks?- ScottM
- Thread
- drilling jig pen
- Replies: 11
- Forum: Where Can I Find, Buy or Sell?
-
M
Drilling a simple little hole
How would you drill a simple hole straight and centered on the end of a 7' 4x4 post? Going to be a bed post. Hole is for the finial. Have thought about about it and can't come up with a solution. No lathe available and I am not sure a 7' post would even fit on all but the longest ones...- mtrager
- Thread
- drilling hole simple
- Replies: 7
- Forum: General Woodworking
-
Video Review: Drilling, Tapping and Milling on the Drill Press
Drilling, Tapping and Milling on the Drill Press ...with Rudy Kouhoupt Ok gang, if you are using a drill press, planning to use a drill press or even look sideways at a drill press..... This video answers almost any question you could have about the use of a drill press. He covers all... -
VERITAS Shelf Drilling Jig
Does anyone have the VERITAS Shelf Drilling Jig? If so, what is your opinion of the jig? Is it worth $180? I am working on my 3rd built in unit and imagine I'll get additional requests, so if it is a good jig I'd think I'll have a need for it in the future. Thanks!- nelsone
- Thread
- drilling jig shelf veritas
- Replies: 9
- Forum: General Woodworking
Premier Sponsor
Our Sponsors
LATEST FOR SALE LISTINGS
-
-
NOS Square D H361N Heavy Duty Safety Switch(s) $125 ea.
- Started by Howie
- Replies: 0
-
-
Pending For Sale - SawStop PCS cast iron wings
- Started by Warped Woodwerks
- Replies: 0
-