Hello fellow woodworkers. I recently purchased a new Incra TSLS fence system for my Table saw. While waiting for it to arrive I decided to check out my alignments on the saw today. What I found is the rear of the blade to the left miter is off by .004 away from the fence (checked by a dial indicator). From everything I can find online .002-.003 or better is what you should strive for if possible. My question is how difficult would it be to adjust this tiny of an adjustment...if even possible? I feel like just the act of tightening the bolts back down after an adjustment could cause it to move possibly making that alignment even worse.
Thank you for any help or suggestions you may have.
Thank you for any help or suggestions you may have.