So to start with, we just moved. I am setting up the shop. I have a place for my 3HP Woodtek 4 bagger DC and it's got an electrical outlet I just installed. I am pretty convinced on getting the Oneida Super Dust Deputy XL (has 6" Inlet and Outlet which matches my DC) and building a stand for it and rigging up a 55 gallon drum to collect. Opinions are welcome on that subject. Main thing I am asking about is should I go PVC or Metal. Leaning toward metal. If metal, quick-snap or Spiral? And lastly where is the best place to order from concerning price as it seems Oneida is expensive and has every fitting you can think of but other retailers I have found has limited selections. I have the design concept pretty much down, just need to figure out what to put in the design. Thanks in advance!