Lighthouse Scroll Saw Portrait.
The design is from @scrollsawvillage and is cut from 1/4 inch material with 1/4 inch backer board. I cut out the entire portrait with number 5 reverse tooth blades. The frame is ripped down blue pine that I ripped down into one inch square strips which I then custom made for the piece to go in.
#ArtisanPirate
The design is from @scrollsawvillage and is cut from 1/4 inch material with 1/4 inch backer board. I cut out the entire portrait with number 5 reverse tooth blades. The frame is ripped down blue pine that I ripped down into one inch square strips which I then custom made for the piece to go in.
#ArtisanPirate
