Latest Amazing Project Off Of My @longer.global Ray5 5 Watt Laser Engraver.
5 Christmas Snowflake Ornaments!
Designed in @lightburnsoftware using a Steve Good Scroll Saw pattern, I laser cut 5 of the ornaments from 1/4 inch luan I picked up @buildersdiscountcenter
Each ornament took around 20 minutes to cut at a Speed of 300, Power of 95% and 5 Passes.
After all were done I stained them with @minwaxusa Golden Pecan stain and after that dried I gave them several coats of @rustoleum Clear Gloss for protection.
For a final touch I added a short hemp cord to all 5 ornaments.
A great simple project to get into the Christmas Season!
.
.
#ArtisanPirate
5 Christmas Snowflake Ornaments!
Designed in @lightburnsoftware using a Steve Good Scroll Saw pattern, I laser cut 5 of the ornaments from 1/4 inch luan I picked up @buildersdiscountcenter
Each ornament took around 20 minutes to cut at a Speed of 300, Power of 95% and 5 Passes.
After all were done I stained them with @minwaxusa Golden Pecan stain and after that dried I gave them several coats of @rustoleum Clear Gloss for protection.
For a final touch I added a short hemp cord to all 5 ornaments.
A great simple project to get into the Christmas Season!
.
.
#ArtisanPirate
Attachments
-
396903114_7333695973330466_3849146787443872514_n.jpg257.3 KB · Views: 91
-
396909042_7333695959997134_6846571472702424730_n.jpg338.2 KB · Views: 93
-
396916783_7333695949997135_2301345947199400403_n.jpg141 KB · Views: 89
-
396973672_7333695963330467_8673853939276239321_n.jpg218 KB · Views: 85
-
397072136_7333695953330468_1216580236295923322_n.jpg275.9 KB · Views: 86