It used my DeWalt track saw inside today. I am making a 10 foot dining room table with a 7/8 thick cherry top. It is over 42 inches wide. I had to make it in 3 sections and glue the sections together in the dining room due to weight. So I needed to trim the glueup slightly at the ends - cross cut the top. The blade was not in the wood on one side and the first cut made a bit of a mess. Then I forgot to turn on the shop vac on the other end and saw how much dust was being generated. The shop vac was getting the majority of the dust, even with one side of the blade exposed. Buried, it gets almost all of it.