Handplane and general sharpening workshop March 12

Status
Not open for further replies.

Mike Davis

Mike
Corporate Member
If we have enough interest in a workshop we will choose a time and place.

I said I wouldn't do this this year but there seems to be a need.

$30 donation to NCWW and lunch will be provided.

Similar workshops cost from $75 to $125 and are usually limited to one plane and/or one chisel.

Many here can attest to the quality of our workshops.

March 12
 
Last edited:

Jeremy Scuteri

Jeremy
Staff member
Corporate Member
Re: Handplane and general sharpening workshop

I have been to multiple hand plane workshops taught by Mike. They are really good and definitely worth more than $30. If there are open slots as the event approaches, I would take one. I will hold off on signing up to give others the opportunity first though as I have already attended two of these workshops in the past.



Here is the current sign up sheet (I will update this post as things change):

Sign Up List:
1. Mark (Mark Gottesman) - Paid
2. Raymond (Raymond) - Paid
3. William (wjohnson925) - Paid
4. Rich (Mrfixit71) - Paid
5. Heath Hendrick (HMH) - Paid
6. Brian (wbwufpack) - Paid
7. Rick (tomcat1055) - Paid
8. David (DavidS) - Paid
9. Dirk (golfdad) - Paid
10. Kent Adams (Kent Adams) - Paid
11. Doug (vinson) - Paid
12. John (JohnnyR) - Paid
13. Phil (PhilCK) - Paid
14. Scott (Grimmy2016) - Paid
15. Rick (Ralrick) - Paid


Waiting List:
1. Richard (marinosr)
2.
3.


I can't make March 12, but I want to be on the next waiting list if there is one:
1. Matt (mpholway)
 
Last edited:

Mike Davis

Mike
Corporate Member
Re: Handplane and general sharpening workshop

I have a two or three hand planes that need some work, if any of the new members that have been asking about hand planes sign up for this workshop I will include a free plane.
 

Raymond

Raymond
Corporate Member
Re: Handplane and general sharpening workshop

If the timing is right, I will attend. I have a junk plane (recently made) I think will work for learning with. Count me and I will decide after the date is announced.
 

wjohnson925

New User
William
Re: Handplane and general sharpening workshop

New(ish) member, pretty comfortable with power tools, but planes still defeat me. Would love to come to this workshop, let me know when and where and if available will be there!
 

Mrfixit71

Board of Directors, Treasurer
Rich
Staff member
Corporate Member
Re: Handplane and general sharpening workshop

I'm interested. Please put me on the list.
 

Mike Davis

Mike
Corporate Member
Re: Handplane and general sharpening workshop

That's enough to get started.

place will be Bill Clemmons shop in Liberty, NC.

Let's pick a Saturday mid February.
 

Bill Clemmons

Bill
Corporate Member
Re: Handplane and general sharpening workshop

That's enough to get started.

place will be Bill Clemmons shop in Liberty, NC.

Let's pick a Saturday mid February.



Early to mid-March might work better. Last time we tried a February workshop we had the ice storm and had to cancel. Also, I've got a huge project underway that should be out of the shop by late February.
 

Mike Davis

Mike
Corporate Member
Re: Handplane and general sharpening workshop

I've asked Jeremy to take over the organization of this event.

thanks Jeremy
 

tomcat1055

New User
Rick
Re: Handplane and general sharpening workshop

I am interested in this workshop, especially if its in March. Have a lot going on in February.
 

Raymond

Raymond
Corporate Member
Re: Handplane and general sharpening workshop

Early to mid-March might work better. Last time we tried a February workshop we had the ice storm and had to cancel. Also, I've got a huge project underway that should be out of the shop by late February.
Early-to-mid March works with my schedule! I will be definitely be there.
 

Grimmy2016

Board of Directors, Development Director
Scott
Staff member
Corporate Member
Re: Handplane and general sharpening workshop

Do I count as NEW anymore? Out of curiosity what type of planes are you needing to be sharpened? I have a 4 but could use a larger plane! ;-)

BTW - the last one you helped me sharpen is still amazing.

I have a two or three hand planes that need some work, if any of the new members that have been asking about hand planes sign up for this workshop I will include a free plane.
 

Mike Davis

Mike
Corporate Member
Re: Handplane and general sharpening workshop

Scott, I think some newer members have signed up. I have 4 and 5 size planes. I think you need a 7 or 8.

You should come see my shop improvements...
 

Grimmy2016

Board of Directors, Development Director
Scott
Staff member
Corporate Member
Re: Handplane and general sharpening workshop

Fair enough... I guess I am "seasoned" now. LOL

And you are right, I believe we discussed 7 or 8. ANd I would love to come by and check your shop out. PM when you have times that work for you.

Scott, I think some newer members have signed up. I have 4 and 5 size planes. I think you need a 7 or 8.

You should come see my shop improvements...
 
Status
Not open for further replies.

Our Sponsors

LATEST FOR SALE LISTINGS

Top