I have an ERC panel to post a "Beware of Dog" sign and then fasten to a poplar tree by the driveway.
It's 14" x 14.5" (two 7.25"w pieces edge glued with TBIII and doweled). ROB sanded at 120g.
I'm wondering whether to leave it natural or perhaps add 3-4+ coats of Waterlox "Original". :dontknow:
This is dispensable and obviously not fine furniture so I'm not gonna lose a lot of sleep over it either way. What do you all think about finish or not? I won't be taking it down and refinishing it every year either.
Just curious if there's some experience out there (pros/cons).
Thanks in advance.
It's 14" x 14.5" (two 7.25"w pieces edge glued with TBIII and doweled). ROB sanded at 120g.
I'm wondering whether to leave it natural or perhaps add 3-4+ coats of Waterlox "Original". :dontknow:
This is dispensable and obviously not fine furniture so I'm not gonna lose a lot of sleep over it either way. What do you all think about finish or not? I won't be taking it down and refinishing it every year either.
Just curious if there's some experience out there (pros/cons).
Thanks in advance.