After 20 years my Powermatic 3520A has developed a problem. The motor does not always start up and continue running------sometimes it will start and run for maybe a minute or two then kick off. Sometimes I unplug it wait a few seconds until I hear a click and plug it back up and it starts. Sometimes I have to go through unplugging restart several times before it starts up and runs. I had this issue once before years ago about 2003 and called Powermatic where they told me to check the wires. Well, I am not an electrician to say the least. There is an electrical schematic in the manual and a trouble shooting chart but I do not see much on the inverter.
So--------------do we have a member with the expertise to check this out and show me what and how to check it out if it occurs again in the future? Not asking for a freebie but I do not know where to find a qualified person for the job. Any help/advice will be appreciated.
Thanks in advance, Jerry
So--------------do we have a member with the expertise to check this out and show me what and how to check it out if it occurs again in the future? Not asking for a freebie but I do not know where to find a qualified person for the job. Any help/advice will be appreciated.
Thanks in advance, Jerry