I finally finished my Drill Press Cabinet. It was mostly based on the Woodsmith Shop design shown below:
First the base was built using poplar and plywood.
Next was a platform to go over the mobile base. Both pieces are on wheels.
One of the modifications is a cabinet with a door that has "depth" for storage. This was a suggestion from Charlie. I'm glad I did it.
Cabinets set in place on top of the platform.
Next was time to paint. I used Dirk's (golfdad) painting recipe which was Sherwin William Pro Classic paint, Floetrol and water. Getting a good paint finish wasn't as easy as I thought it would be.
Trying to hide some defects/seams with filler before the next coat of paint.
Solid wood edge banding on the cabinet faces.
Looks like there is a 25 image limit for a post.....
First the base was built using poplar and plywood.
Next was a platform to go over the mobile base. Both pieces are on wheels.
One of the modifications is a cabinet with a door that has "depth" for storage. This was a suggestion from Charlie. I'm glad I did it.
Cabinets set in place on top of the platform.
Next was time to paint. I used Dirk's (golfdad) painting recipe which was Sherwin William Pro Classic paint, Floetrol and water. Getting a good paint finish wasn't as easy as I thought it would be.
Trying to hide some defects/seams with filler before the next coat of paint.
Solid wood edge banding on the cabinet faces.
Looks like there is a 25 image limit for a post.....