side

  1. gator

    Front, Rear, Side?

    Ok, so on a table saw the front is the side with the switch and you feed the wood from front to back. On a Router table the front of the table is the side with the drawers, etc and you feed the stock from right to left (generally, except when climb cutting). On a planer the front is the infeed...
  2. SteveColes

    Floating Side Menu is Back

    The floating side menu is back with some changes. It wasn't the few changes that took all the time, it was a bug in the software that I use to generate the menu that got exposed. I couldn't fix the bug, so I did a quick and dirty work around. Anyway, please take a look at the menu and its...
  3. DavidF

    Bed side Table - the clock starts now

    Ok Jeff, Now you can start the clock on the bedside table project! 1st pic shows the cherry, curly maple and QSO from The hardwood store. $350 just to start with! After a week in the shop I rough milled it to let it acclimatize to the shop. After another week I milled the case panels to...
  4. DavidF

    Sneak preview of bed side table designs

    Just a quick hint at the way I am going with the tables. Both pick up accents from the bed just finished. The curve of the top drawer front mimics the crest rail curve and the lower apron picks up on the bed rail curves. The cabinet is suspended between 4 legs that are attached at just two...
  5. smessick

    End to Side Finger Joint

    I have made a few chests in which the ends are grain oriented north and south and the front/back is oriented east and west. I was tempted to try a finger joint but couldn't come across anything here or in my literature or Googling about doing this. Anybody out there done it or seen it? Any...
  6. woodworker2000

    Installing Side Extension Wings on TS

    How do you get these things level with the main table and how much variance is acceptable? I started by inserting the bolts and snugging them up, then tapping the wing with a rubber mallet on the top and bottom until it felt like it was the same level as the table. I checked for variations in...

Premier Sponsors

Contact for your financial processing needs!

Our Sponsors

Top