shear

T
Need use of a metal shear and brake.

I have a piece of 22ga 24"x 24" sheet steel I need to cut to 21-1/2" x 15". I then need to notch the corners and bend a 1/4" edge on all 4 sides. Does anyone in the Raleigh area have the time and the tool to help me out. It will be a couple weeks before I am back in town. TIA
- toolferone
- Thread
- Sep 18, 2010
- brake metal shear
- Replies: 6
- Forum: User Announcements
S
Tear out and shear scraping

Hi all, Just wanted to get some thoughts from the group on how they may be using shear scraping, as I have seen Lyle Jamieson, Bill Grumbine and David Ellsworth demonstrate on their excellent videos to deal with tear out. I am discovering that different would offer different levels of tear out...
- sasjzl
- Thread
- Nov 29, 2009
- scraping shear tear
- Replies: 12
- Forum: Woodturning
Made a New Tool - Shear Scraper,End Grain Hollowing or some such thing

New tool I made today. its a Shear Scraper,End Grain Hollowing or some such thing. :roll: It has a 1/2" by 12" tool steel shaft, the tip is a Sorby Internal Round Scraper/Cutter and a Walnut Tool Handle James
- jimwill48
- Thread
- Feb 21, 2009
- end grain hollowing made scraper shear thing tool
- Replies: 11
- Forum: Woodturning